810449
13
Zoom out
Zoom in
Previous page
1/28
Next page
GB
GB 13
Minimum water throughput of approx. 900 kg/h must be ensured. It must
not be possible to shut off this supply line!
The heating insert must be aligned so that the front vents are at the
highest point.
All safety-relevant components must be integrated in the system in such a
manner that the function and the leak tightness can be checked at any time.
The discharge of the thermal discharge safety device must be designed in
such a manner that a check (e.g. via a drain with siphon) can take place
at any time.
2.9 THERMAL PUMP CONTROLLER
The fireplace insert/tiled stove insert must always be operated with a
suitable return flow temperature boost. The thermostat switch necessary
in this regard is provided with the insert. The associated wrapped capillary
tube must be carefully unwrapped and pushed into the labelled immersion
sleeve on the front, top left, and secured with the provided clamp. The
thermostat switch must be electrically wired to the power supply and the
return flow boost (circulation pump). This ensures that the circulation pump
only starts up at a sufficient water temperature and switches off if the
specified temperature is undershot.
AElectrical connection of the thermostat pump controller
BThermostat as pump controller (e.g. Afriso) with approx. 3.0 m
connecting line 2 x 0.75 mm2
CReturn flow boost (circulation pump)
DTerminal 1 not necessary
EPhase L (brown line)
FSwitched phase L (blue line)
Fig. 3a
Fig. 3b
The brown conductor must be
wired to the phase (L) of the
mains supply line.
blue
brown
brown
The blue conductor is
connected as switched phase
(L) to the circulation pump or
the return flow boost.
The connection is executed in
accordance with Fig. 3a.
The zero conductor and the PE conductor of the supply line are connected to
the circulation pump or the return flow boost. The circulation pump should
only be controlled via a boiler controller or similar devices if the controller is
appropriately suitable. For the installation, the instructions in the installation
and operating manual of the built-in thermostat must be complied with! The
sensor of the thermostat must be pushed into the appropriately marked
connection opening of the Nova E H2O (sealed-in immersion sleeve) and
permanently fixed in place. The maximum load capacity of the thermal pump
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Nova E H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Nova E H2O in the language / languages: English as an attachment in your email.

The manual is 3.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Nova E H2O

Spartherm Nova E H2O User Manual - German - 28 pages

Spartherm Nova E H2O User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info