810449
11
Zoom out
Zoom in
Previous page
1/28
Next page
GB
GB 11
AReturn 1" internal thread
BInlet for safety heat exchanger ½" external thread
CFlow 1" internal thread
DDischarge for safety heat exchanger ½" external thread
EVentilation
FImmersion sleeve for thermal discharge safety device
GImmersion sleeve for pump thermostat
HSafety valve 3 bar
IVentilation
JThermostat switch - pump (e.g. Afriso, type: GTK)
KConnection - heating system
LBuffer tank
MReturn flow boost valve (e.g. ESBE, type LTC 141)
NFilling and emptying valve
OCompensation tank
POpen drain
QThermal discharge safety device (e.g. SYR. 3065)
Integration of the Nova E H2O in a heating system: Please note: Fig. 2b
shows one possibility of how the Nova E H2O can be integrated in an exist-
ing heating system. However this example does not replace the detailed
planning of the installation by a specialised company:
For heating lines, we recommend a minimum nominal pipe diameter of:
Copper pipe, at least 28 x 1.0 mm or steel pipe, min. 1" (DN25, 33.7 x
3.25 mm) or larger. However, the integration must always be executed after
configuration by a specialised company.
2.4 MINIMUM CROSS SECTIONS - CONVECTION AIR
The minimum cross sections for convection air (supply air and recirculating
air) for the heating insert with metallic coasting temperature box in the
cladding or in the heating chamber must be designed as follows.
Hot air: 990 cm² at the upper points in the cladding
Cold air: 990 cm² at the lower points in the cladding
Minimum cross sections if connecting lines are shorter than 1.0 m and flue
gas connection on the upper flue gas connection:
Hot air: 450 cm2
Cold air: 370 cm2
In addition, the Regulations of the German Tiled Stove and Air Heating
Constructors Association (TR-OL 2006) must also be taken into account.
2.5 VENTILATION
For ventilating the water heat exchanger, the ventilation plug, as described
under point 2.3, must be used. This ventilation plug can be replaced with
a suitable automatic vent for example, if the heating chamber temperature
does not cause the heating water to boil inside the automatic vent.
2.6 SAFETY VALVE
In the direct vicinity of the Nova E H2O, a type-tested safety valve (e.g. make
Syr, type 1915) with an activation overpressure of max. 3.0 bar must be
mounted in the flow line. When mounting, the manufacturer‘s specifications
(e.g. ambient temperature) of the safety valve must be taken into account. A
shut-off possibility must not be integrated in the system between the safety
valve and the Nova E H2O. This could render the safety device inoperable.
Moreover, all necessary safety devices must be integrated in the entire
system in such a manner that safe operation is ensured.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Nova E H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Nova E H2O in the language / languages: English as an attachment in your email.

The manual is 3.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Nova E H2O

Spartherm Nova E H2O User Manual - German - 28 pages

Spartherm Nova E H2O User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info