733816

Soundmaster NR540 Manual

17
Zoom out
Zoom in
Previous page
1/87
Next page
M_NR540
/
English
Instruction Manual
6
Phono
1. operation
- Remove the stylus protector.
- Be sure that the tone arm is being detached from the tone
arm rest before operating and re-secured again afterwards.
1. Select to “Phono” function by pressing Phono/Aux button (24)
2. Set the speed selector (29) to the proper position depending on the record to be played.
3. Place the record on the platter (use the spindle adaptor (26) if required).
4. Set the Tone arm lever (28) to the up position.
5. Lift the tone arm from the rest and slowly move it to the record side. The platter will start to rotate and position the tone arm over
the desired position of the record.
6. Pull down the Tone arm lever (28). The tone arm will come slowly on the recorder and start playback.
7. At the end of record, the tone arm will return to the rest position automatically.
8. To stop manually, lift the tone arm from the record and return it to the rest.
Play suspension
Set the cueing lever (28) to the up position will life up the tone arm and then stop playback temporarily
Remark:
- Due to the auto return system was mechanical design and reset point will be affected after transportation.
Thus, the tone arm will return to the rest automatically when first time place it to the platter and it was not
the malfunction
- Due to the length of the record is various, if you find the tone arm cannot return automatically after
playback of record. Please return the tone arm back to the rest position manually or adjust the auto return
point as below procedure.
Important:
To make sure the turntable can play the record with different standard completely, a hole with “NO OPEN” PVC plate located at the
back of the unit (33) to adjust the screw inside the turntable.
When the turntable stop early and the auto-return, pls use a screw driver to turn the screw inside the hole about 45 degree in
clockwise direction, if the record still can not be played completely, stop play and re-turn the screw 45 degree in clockwise direction
again, till the turntable can be play the record completely and auto return.
When the turntable can not be stop and auto return but keep running after playing the record completely, pls use a screw driver to
turn the screw inside the hole about 45 degree in counter-clockwise direction, if the record still can not be played completely, stop
play and re-turn the screw 45 degree in counter-clockwise direction again, till the turntable can be play the record completely and
auto return.
Remark: Due to Phono and Aux design in same channel of this unit, once the Aux in jack (2) plugged by any 3.5mm stereo plug, the
Phono function will change to Aux in automatically and the turntable will stop to spin. Made sure the Aux In jack (2) is not plugged by
anything before playing phono.
Stylus assembly
Cartridge
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster NR540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster NR540 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Norwegian as an attachment in your email.

The manual is 15,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info