733816

Soundmaster NR540 Manual

16
Zoom out
Zoom in
Previous page
1/87
Next page
4. Press “RECORD” button (10) again, the system will flashing with “ ” icon. Encoding is performing now.
5. After completing of recording, unit will stop playback automatically.
6. Press “ stop ” button (14) to interrupt the recording mode anytime.
7. For encode whole CD track, pls stay CD in stop mode then press “RECORD” button (10) three times until the display
flashing “ ”, then system will start to playback CD and encoding whole disc.
M_NR540 / English Instruction Manual
5
Remark:
- The recording speed is 1:1 and according to the actual plying time of the CD track
- The recording format is preset at – MP3 bit rate: 128 kbps, sampling rate: 44.1khz
- No song title will be recorded during encoding mode
- To interrupt the recording, press the “Stop” button (14) during record mode
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the “Record” button. The operation
procedures is same as CD encoding as stipulate on above, and the system will switch to copy mode only if MP3 file being read.
B) Phono/Cassette encoding
1) Set the function button to “Phono or Cassette” mode and then press the “Record” button (10) directly.
2) The LCD display will flashing “CHECK” a while then display “ ” & “ ” are flashing. Now the system is starting the
encoding mode.
3) Start playback at phono or cassette for the track which you want to record to USB
4) After finish of recoding, press the “Stop” button (14) until the LCD stop flashing and return to “Phono or Tape” mode.
C) Aux-in encoding
1) Connect the Aux-in jack with the device which you want to record
2) Set the function button to “Phono/Aux-in” mode and then press the “Record” button (10) directly.
3) The LCD display will flashing “CHECK” a while then display “ ” & “ ” are flashing. Now the system is starting the
encoding mode.
4) Start playback at phono or cassette for the track which you want to record to USB
5) After finish of recoding, press the “Stop” button (14) until the LCD stop flashing and return to “Phono or Tape” mode.
D) Tuner encoding
1) Set the function button to “AM/FM” mode and tune to desired station for encoding, press the Radio encode button (5), LCD
display will light up and appear “RADIO”. Then press the “Record” button (10) directly.
2) The LCD display will flashing “CHECK” a while then display “ ” & “ ” are flashing. Now the system is starting the
encoding mode.
3) After finish of recoding, press the “Stop” button (14) until the LCD stop flashing and return to “Tuner” mode.
E) Track separation (by remote handset)
You can divide the recording music from phono/Cassette/Tuner to USB track by trace during encoding. Every time when press the
“ ” (track separation) button once at remote handset during encoding from phono/tape/radio to USB, the system will generate a
new track and continuous the recording. The current text at LCD display will flashing one time, it mean the unit is creating a new
track successfully.
Removing of USB
To remove the USB, turn off the power or switch the function mode to either CD or tuner first. For USB port, unplug it by pulling out
the USB socket directly.
8.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster NR540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster NR540 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Norwegian as an attachment in your email.

The manual is 15,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info