733816
15
Zoom out
Zoom in
Previous page
1/87
Next page
M_NR540
/
English
Instruction Manual
4
Random
Random
Off mode
--------------
For MP3 disc
(1) repeat 1 (2) repeat 1 folder (3) repeat all track (4) random (5) off mode
Play mode
Indicator on LCD
display
Repeat single track
Repeat single folder
Repeat all track
Random mode
Random
Off mode
-----------------
Repeat play
You can listen to the desired tracks or folder repeatedly by this function.
Random play
You can listen to all the tracks or folder in a random order by this function
CD disc programming (by remote control)
Up to 20 tacks can be programmed for CD file and play in any order. Before use, be sure the system is at stop mode before
programming:
1. Set in CD/USB mode & stop the CD playback.
2. Press the “Program” button, “PROG” will appear on LCD display (6). Moreover, it will indicate program no. and digits for track no.
to be programmed.
3. Select a desired track by pressing skip or buttons (13/12).
4. Press the “Program” button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press CD “Play/pause” button (15) to play the disc in assigned order.
7. To cancel the programmed file, Press “Stop” button on remote handset until PROG is disappear on LCD display (6)
Playback of MP3 song via USB storage media
Connecting
The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting port.
1. Set function at CD/USB mode by press CD/USB button (22) and then press source button (11) to select “USB” mode.
2. Plug-in the USB pen-drive with the face up & make sure it going into completely
Connecting the USB upside down or backwards could damage the audio system or the storage media (USB thumb
drive). Check to be sure the direction is correct before connection.
3. The system will start reading the storage media automatically after connecting, and LCD display (6) will show the total number
of MP3 files and total number of folder being detected and start to playback automatically.
4. Repeat the same playback procedure as playing CD/MP3 disc as above
Remark
- The system can detect and read the file under MP3 format only though the USB port.
- If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3 player
may not be able to play via the USB socket. This is not a malfunction of the system.
Encoding of CD/phono/Cassette/Tuner/Aux-in into MP3 file
The system is able to encode normal CD or turntable to MP3 format and recording at memory media with USB connecting port. The
system will create a music folder name RIP for CD-DA encode, REC for Tuner, Aux, Cassette encode and “FROMCD” for
CD-MP3 disc copy and encode bitrate default at 128kbps.
A) CD encoding
I) Encoding 1 track
1. Perform normal playback of the CD track you want to encode & record,
2. Press “RECORD” button (10) during the playback of the desire track and the display will show “ ” and “ ” flashing.
3. Press “RECORD” button (10) again the display will show “ ” and ”ONE” flashing.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster NR540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster NR540 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Norwegian as an attachment in your email.

The manual is 15,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info