Manual Soundcraft MFX12 (page 19 of 48) (English)

611455

Zoom out

Zoom in

1/48

7 MUTE

All outputs from the channel are enabled when the MUTE switch is released and

muted when the switch is down. The MUTE switch’s inbuilt LED glows when the chan-

nel is muted.

8 FADER

The 60mm FADER gives you smooth control of the overall signal level in the channel

strip, allowing precise balancing of the various source signals being mixed to the

Master Section. It is important that the input level is set correctly to give maximum

travel on the fader which should normally be used at around the “0” mark. See the

“Initial Setup” section on page 33 for help in setting the right level.

9 PFL

When the latching PFL switch is pressed, the pre-fade pre-mute signal is fed in mono

to the headphones, control room output and meters, where it replaces the MIX. The

AFL/PFL ACTIVE LED on the Master section illuminates to warn that a PFL is active.

The Left and Right meters display the PFL signal in mono. This is a useful way of

listening to any required input signal without interrupting the main mix, for making

adjustments or tracing problems.

10 CHANNEL PEAK LED

This LED will light when the signal level approaches clipping at any of the three moni-

tored points: PRE-EQ, POST-EQ and POST-FADE.

11 SIGNAL PRESENT (SP) LED

The SP LED glows when a signal is present. The feed point for the LED is post-EQ, pre-

mute.

12 MIX/SUB

When this switch is up, the channel’s post-fade signal is routed to the Mix (left and

right) buses. When the switch is depressed, the post-fade signal is routed to the Sub-

group (left and right) buses.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft MFX12 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Soundcraft MFX12 Manual

Product: