611444

Soundcraft M Series Manual

25
Zoom out
Zoom in
Previous page
1/48
Next page
USER GUIDE
23
USING YOUR SOUNDCRAFT M SERIES CONSOLE
The final sound from your PA system can only ever be as good as the weakest link in the chain, and
especially important is the quality of the source signal because this is the starting point of the chain. Just
as you need to become familiar with the control functions of your mixer, so you must recognise the
importance of correct choice of inputs, microphone placement and input channel settings. However, no
amount of careful setting up can take account of the spontaneity and unpredictability of live performance.
The mixer must be set up to provide `spare’ control range to compensate for changing microphone position
and the absorption effect of a large audience (different acoustic characteristics from sound check to show).
MICROPHONE PLACEMENT
Careful microphone placement and the choice of a suitable type of microphone for the job is one of the
essentials of successful sound reinforcement. The diagrams on the left show the different pick-up patterns
for the most common types of microphone. Cardioid microphones are most sensitive to sound coming from
in front, and hypercardioid microphones offer even greater directivity, with a small amount of pickup behind
the microphone. These types are ideal for recording vocalists or instruments, where rejection of unwanted
sounds and elimination of feedback is important. The aim should be to place the microphone as close as
physically possible to the source, to cut out unwanted surrounding sounds, allow a lower gain setting on the
mixer and avoid feedback. Also a well-chosen and well-placed microphone should not need any appreciable
equalisation.
There are no exact rules - let your ears be the judge. In the end, the position that gives the desired effect
is the correct position!
INITIAL SET UP
Once you have connected up your system (see the sections on connection and wiring earlier in this manual
for guidance) you are ready to set initial positions for the controls on your mixer.
Set up individual input channel as follows:
• Connect your sources (microphone, keyboard etc.) to the required inputs.
• WARNING: Phantom powered mics should be connected before the +48V is
switched on. Ensure the PA system is OFF when switching phantom power on or off.
• Set Master faders at 0, input faders at 0, and set power amplifier levels to about 70%.
• Provide a typical performance level signal and press the PFL button on the first channel, monitoring
the level on the bargraph meters.
• Adjust the input gain until the meter display is in the amber section, with occasional peaks to the first
red LED at a typical maximum source level. This allows sufficient headroom to accommodate peaks
and establishes the maximum level for normal operation (but see note below).
• Repeat this procedure on other channels as required. As more channels are added to the mix, the
meters may move into the red section. Adjust the overall level using the Master Faders if necessary.
• Listen carefully for the characteristic sound of `feedback’. If you cannot achieve satisfactory input
level setting without feedback, check microphone and speaker placement and repeat the exercise. If
feedback persists, it may be necessary to use a Graphic Equaliser to reduce the system response at
particular resonant frequencies.
NOTE:
The initial settings should only be regarded as a starting point for your mix. It is important to remember that
many factors affect the sound during a live performance, for instance the size of the audience!
The front panel drawing on page 8 shows typical initial control positions which is a
useful guide to setting up the mixer for the first time.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft M Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft M Series in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundcraft M Series

Soundcraft M Series User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info