812334
19
Zoom out
Zoom in
Previous page
1/28
Next page
5. Settings
The basic settings for the control function of the heating circuit are applied. Basic
settings applied.
By no means does the controller replace the safety appliances on site!
Operating mode
Auto: automatic/normal operation taking into account operating times (day, comfort increase, night reduction).
Reference: fixed flow temperature independent of the outside temperature. The desired flow temperature must be set in Menu 5.8.
Reference program: e.g. for screed heating. For the next 14 days, can be found under Menu 4. different fixed flow temperatures can
be entered. After 14 days, the reference temperature of the 14th day is used continuously until the operating mode is changed. Dif-
ferent temperature values can be set in menu 5.4. for every individual day separately.
Set room controllers have no influence on the setpoint program!
If a room controller is set for the respective heating circuit, the set mode or measured room temperature has an influence
on the flow temperature of the heating circuit.
S/W Day
Summer / Winter changeover in daytime mode
If this value is exceeded at the outdoor sensor the controller automatically switches the heating circuit off = Summer mode. If the out-
door temperature drops below this value, the heating circuit is switched on again = Winter mode.
In addition to the operating times in normal daytime operation, this setting is also valid for times with activated comfort.
S/W Night
Summer/Winter changeover in night-time mode
If this value is exceeded at outdoor sensor S1 during the nighttime mode times, the controller automatically switches the heating circuit
off = Summer mode. If the outdoor temperature drops below this value, the heating circuit is switched on again = Winter mode.
Curve
Type and slope of the heating characteristic curve
The characteristic curve is used to control the heat dissipation of the heating circuit relative to the outdoor temperature. The demand
for heat differs due to factors such as the type of building, heating, insulation and outdoor temperature. For this reason, the controller
can operate with a normal straight curve (setting ‚simple‘) or split curve (setting split‘).
If simple is selected, the curve is adjusted using the graphic diagram. While setting the slope, the controller also shows the slope
value and the calculated target flow temperature at -12 °C as a reference point.
If split is selected, the curve is set in the following steps:
1. Outdoor temperature for slope change
2. Slope over outdoor temperature for change
3. Slope below outdoor temperature for change
While setting the slope, the controller also shows the slope value and the calculated target flow temperature at -12 °C as a reference
point. In case of repeated adjustment of the split curve, the settings appear in reverse order.
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel MHCC 24V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel MHCC 24V in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel MHCC 24V

Sorel MHCC 24V User Manual - German - 30 pages

Sorel MHCC 24V User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info