812338
35
Zoom out
Zoom in
Previous page
1/44
Next page
Heating Circuit request
The burner is started for a heating circuit heat request.
Burner sensor
Reference sensor for burner function. If this temperature at the set sensor is exceeded, the burner is shut down.
Delay
Switch delay, valid for cooling and heat request. The burner first turns on after this time span if the switch conditions were
reached and are still present. This function should prevent unnecessary switches through temperature changes or create a regen-
erative energy source that adds energy.
Burner offset
When using the 0-10V outputs V1 or V2 for the burner function, the requested temperature is emitted through a corresponding
voltage. This offset increases the requested temperature.
Eco mode (during solar charge)
The economy mode for this function can be operated in 2 different variants:
Shutdown: The function is not started with an active solar charge.
Decrease:
For a heating request the function first turns on when the conditions and an additional offset were not met.
For a DHW request the function only activates when T eco is not met and de-activates when T eco + DHW-heating is achieved.
Tmax
Maximum temperature at the burner sensor. If this temperature at the set sensor is exceeded, the burner is shut down.
Enable
(temporal) enable for this function
Here, the desired periods can be set in which the function is enabled.
For each weekday, three times can be specified, furthermore, you can copy individual day to other days.
Outside the set times the function is disabled.
Anti Legionella
see " Anti Legionella " on page 30.
Boiler pump
A boiler pump is turned on and off together with the burner. Function is only visible if the additional function Burner is activated.
Boiler pump Tmin
Minimum temperature at the burner sensor for enabling of the boiler pump. If this temperature is exceeded at the burner sensor,
the burner pump is activated.
Compressor
The function switches on the compressor from a heat pump if a heat request from the heating circuit or DHW sensor is present.
DHW request
The compressor is started with a DHW - heat request.
HC request
The compressor is started with a heating circuit - heat request.
Cooling request
The compressor is started when cooling is requested.
Eco mode (during solar charge)
The economy mode for this function can be operated in 2 different variants:
Shutdown: The function is not started with an active solar charge.
Decrease:
For a heating request the function first turns on when the conditions and an additional offset were not met.
For a DHW request the function only activates when T eco is not met and de-activates when T eco + DHW-heating is achieved.
35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel LHCC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel LHCC in the language / languages: English as an attachment in your email.

The manual is 8.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel LHCC

Sorel LHCC User Manual - German - 46 pages

Sorel LHCC User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info