812338
31
Zoom out
Zoom in
Previous page
1/44
Next page
Last AL heat
This displays when the last successful heating has occurred.
AL sensor 1
On this sensor, the temperature of the AL function is measured.
AL Sensor 2
Optional AL sensor
If this sensor is set for a successful heating Tset AL have to be achieved at this sensor too for the action time.
Electric heating rod (auxiliary heating)
An electric heating element that heats up the storage water heater if needed.
Temperature values which are set too high can lead to scalding or damage to the system. Scalding protection must be
provided by the customer!
DHW request
Electric heating rod is started for a DHW - heat request.
HC request
Electric heating rod is started with a heating circuit - heat request.
TH Set
The target temperature of the thermostat sensor 1. Below this temperature, the eat turns on until TH Reference + Hysteresis is
reached.
Delay
After reaching the switching conditions, the time set here will be waited until the heating rod is actually turned on in order to give
another heat source time to heat up.
Hysteresis
Hysteresis of set point temperature.
Ecomode
The Energy Saving Mode switches the heating on when “T eco on is undershot and heats up to “T eco + hysteresis when solar
charge or solid fuel boiler is active.
Sensor 1
TH Reference is measured at the thermostat sensor 1. With a connected thermostat sensor 2, the relay switches on if “TH Ref” at
thermostat sensor 1 is undershot and off if “TH Ref + hysteresis is exceeded at thermostat sensor 2.
Sensor 2
Optional switch off sensor
If “TH target” + hysteresis is exceeded on thermostat sensor 2, the relay will be shut down.
Electric heating rod approval times
Release time for the electric heating rod
Here the desired periods are set in which the electric heating rod is approved. For each weekday, three times can be specified,
furthermore, you can copy individual day to other days. The electric heating rod is shut down outside of the set times.
Anti-legionella heating rot
see " Anti Legionella " on page 30.
Cooling function
The dissipation function is a simple cooling function.
The relay of this function switches "on" as soon as the set Tsoll temperature at the assigned cooling sensor is exceeded and the
set time delay has elapsed.
If the temperature at the cooling sensor reaches Tsoll hysteresis, the function switches "off" without a time delay.
Tset
The target temperature at the set sensor for the function dissipation (cooling simple).
Cooling sensor
The corresponding cooling sensor for the dissipation function is set here.
31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel LHCC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel LHCC in the language / languages: English as an attachment in your email.

The manual is 8.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel LHCC

Sorel LHCC User Manual - German - 46 pages

Sorel LHCC User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info