812338
30
Zoom out
Zoom in
Previous page
1/44
Next page
Through the thermostat function, additional energy can be added to the system while being time and temperature controlled.
Temperature values which are set too high can lead to scalding or damage to the system. Scalding protection must be
provided by the customer!
Other values, for example, T eco, apply in economy mode.
DHW request
Thermostat is started for a DHW - heat request.
HC request
Thermostat is started with a heating circuit - heat request.
Tset
The target temperature of the thermostat sensor 1. Below this temperature, the thermostat turns on until Tref + Hysteresis is
reached.
Hysteresis
Hysteresis of set point temperature.
Energy Saving Mode
The Energy Saving Mode switches the heating on when “T eco on is undershot and heats up to “T eco + hysteresis when solar
charge or solid fuel boiler is active.
Delay
Delay for this function.
The function first turns on after this time span if the switch conditions were reached and are still present. This delay is intended to
prevent unnecessary switching operations caused by temperature fluctuations or to
Give another energy source time to provide the necessary energy.
Thermostat sensor 1
TH Set is measured at thermostat sensor 1. With a connected thermostat sensor 2, the relay switches on if “TH Ref” at thermostat
sensor 1 is undershot and off if “TH Ref” + hysteresis is exceeded at thermostat sensor 2.
Thermostat sensor 2
Optional switch off sensor
If “TH target” + hysteresis is exceeded on thermostat sensor 2, the relay will be shut down.
Thermostat enable
Thermostat activity times
Here the desired periods are set in which the thermostat function is approved. For each weekday, three times can be specified,
furthermore, you can copy individual day to other days. The thermostat function is shut down outside of the set times.
Anti Legionella
With the help of the anti legionella function (hereinafter referred to as: AL), the system can be heated up at selected times in order
to free it of legionella.
In the delivery state, the anti legionella function is switched off.
As soon as it has heated up with “AL” turned on, information with the date will be shown in the display.
This anti legionella function does not offer any secure protection against legionella, because the controller requires an
adequate added amount of energy and the temperatures cannot be monitored in the entire storage area and the con-
nected pipe system.
During the operation of the anti legionella function, if applicable, the storage is heated above the set value “Tmax”,
which may lead to scalding and system damage.
AL Tref
For a successful heating, this temperature has to be reached at the AL sensor(s) for the exposure time period.
AL residence time
For this period of time the AL Tref temperatures at the activated AL-sensors have to be reached for a successful heating.
30
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel LHCC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel LHCC in the language / languages: English as an attachment in your email.

The manual is 8.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel LHCC

Sorel LHCC User Manual - German - 46 pages

Sorel LHCC User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info