581035
111
Zoom out
Zoom in
Previous page
1/140
Next page
111US
Additional Information
The signal strength of the stations is
too weak with automatic tuning. Use
direct tuning.
Make sure you set the tuning scale
correctly (when tuning in AM stations
with direct tuning) (page 50).
No stations have been preset or the
preset stations have been cleared
(when tuning by scanning preset
stations is used). Preset the stations
(page 50).
Press AMP, then press DISPLAY
repeatedly on the remote control so
that the frequency appears on the
display panel.
The sound is distorted.
Press 2 – on the remote control
repeatedly.
Set the “EQ” setting of the iPod/
iPhone to “Off” or “Flat”.
There is no sound from the iPod/
iPhone.
Disconnect the iPod/iPhone and
connect the iPod/iPhone again.
The iPod/iPhone cannot be charged.
Check that the receiver is turned on.
Make sure the iPod/iPhone is
connected firmly.
The iPod/iPhone cannot be operated.
Check that you have removed the
protect case of the iPod/iPhone.
Depending on the contents of the iPod/
iPhone, it may take time to start
playback.
Turn off the receiver, then disconnect
the iPod/iPhone. Turn on the receiver
again and reconnect the iPod/iPhone.
You are using an unsupported iPod/
iPhone. See “Compatible iPod/iPhone
models” (page 43) for the supported
device types.
The ringtones volume of the iPhone
does not change.
Adjust the ring volume using the
controls on the iPhone.
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See “Compatible USB devices”
(page 45) for the supported device
types.
The USB device is not recognized.
File or folder names are not
displayed on this receiver.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
There is noise, skipping, or distorted
sound.
Turn off the receiver and reconnect the
USB device, then turn on the receiver.
The music data itself contains noise, or
the sound is distorted.
The USB device is not recognized.
Turn off the receiver, then disconnect
the USB device. Turn on the receiver
again and reconnect the USB device.
Connect the supported USB device
(page 45).
The USB device does not work
properly. Refer to the USB device
operating instructions on how to deal
with this problem.
Playback does not start.
Turn off the receiver and reconnect the
USB device, then turn on the receiver.
Connect the supported USB device
(page 45).
•Press N to start playback.
iPod/iPhone
USB device
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony STR-DN840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony STR-DN840 in the language / languages: English as an attachment in your email.

The manual is 14,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony STR-DN840

Sony STR-DN840 Quick start guide - English - 16 pages

Sony STR-DN840 User Manual - Dutch - 124 pages

Sony STR-DN840 Quick start guide - Dutch, Italian, Polish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info