581035
109
Zoom out
Zoom in
Previous page
1/140
Next page
109US
Additional Information
Sound may not be output from the
receiver while the OSD appears on the
TV screen. Press HOME to display the
home menu, then press HOME again.
Audio signals (format, sampling
frequency, bit length, etc.) transmitted
from an HDMI jack may be suppressed
by the connected equipment. Check
the setup of the connected equipment if
the image is poor or the sound does not
come out of the equipment connected
via the HDMI cable.
When the connected equipment is not
compatible with copyright protection
technology (HDCP), the image and/or
the sound from the HDMI TV OUT
jack may be distorted or may not be
output. If this is the case, check the
specification of the connected
equipment.
Set the image resolution of the
playback equipment to more than
720p/1080i to enjoy High Bitrate
Audio (DTS-HD Master Audio, Dolby
TrueHD).
The image resolution of the playback
equipment may need to be at certain
settings before you can enjoy DSD and
Multi Channel Linear PCM. Refer to
the operating instructions of the
playback equipment.
Make sure the TV is compatible with
the System Audio Control function.
If the TV does not have System Audio
Control function, set the “HDMI
Audio Out” settings in HDMI Settings
menu to
“TV+AMP” if you want to listen to
the sound from the TV speaker and
receiver.
“AMP” if you want to listen to the
sound from the receiver.
When you connect the receiver to a
video equipment (projector, etc.),
sound may not be output from the
receiver. In this case, set the “HDMI
Audio Out” to “AMP” in the HDMI
Settings menu (page 94).
If you cannot listen to the sound of the
equipment connected to the receiver
while TV input is selected on the
receiver
Be sure to change the input of the
receiver to HDMI when you want to
watch a program on the equipment
connected via HDMI connection to
the receiver.
Change the TV channel when you
want to watch a TV broadcast.
Be sure to select the correct
equipment or input you want when
you watch a program from the
equipment connected to the TV.
Refer to the operating instructions of
the TV on this operation.
When “Analog Direct” is being used,
the sound is not output. Use other
sound field (page 51).
When using the Control for HDMI
function, you cannot control the
connected equipment using TV’s
remote control.
Depending on the connected
equipment and TV, you may need to
set up the equipment and TV. Refer
to the operating instructions
supplied with each equipment and
TV.
Change the input of the receiver to
the HDMI input connected to the
equipment.
Check that the selected digital audio
input jack is not reassigned to other
inputs (page 83).
The left and right sounds are
unbalanced or reversed.
Check that the speakers and equipment
are connected correctly and securely.
Adjust the sound level parameters
using the Speaker Settings menu.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony STR-DN840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony STR-DN840 in the language / languages: English as an attachment in your email.

The manual is 14,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony STR-DN840

Sony STR-DN840 Quick start guide - English - 16 pages

Sony STR-DN840 User Manual - Dutch - 124 pages

Sony STR-DN840 Quick start guide - Dutch, Italian, Polish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info