581035
113
Zoom out
Zoom in
Previous page
1/140
Next page
113US
Additional Information
Check the settings of the wireless LAN
router/access point and do the setup
again. For details on the settings of the
devices, refer to the operating
instructions of the devices.
Make sure that you use a wireless LAN
router/access point.
Wireless networks are influenced by
electromagnetic radiation emitted by
microwave ovens and other devices.
Move the unit away from these
devices.
Make sure that the wireless LAN
router/access point is turned on.
Cannot control the receiver using the
TV SideView device.
The receiver may take a long time to
connect to the network after you turn
on the receiver. Wait for a few
moments, and then try using the TV
SideView again.
Make sure “Network Standby” is set to
“On” in the Network Settings menu so
that you can use the TV SideView
immediately after you have turned on
the receiver.
Cannot select the Network Settings
menu.
Wait for a few moments after you
turned on the receiver, and then select
the Network Settings menu again.
Cannot connect to the network.
Make sure the wireless LAN router/
access point is turned on.
Make sure the server is turned on.
The network settings on the receiver
may be incorrect. Check the network
status. See “Information”, then select
“Physical Connection” in step 2
(page 95).
If “Connection Fail” appears, set up
the network connection again
(page 57).
The server may be unstable. Restart it.
Confirm that the receiver and the
server are connected to the wireless
LAN router/access point correctly.
Confirm that the server has been set
correctly (page 57). Confirm that the
receiver has been registered to the
server and allows the music streaming
from the server.
When the system is connected to the
wireless network, move the receiver
and the wireless LAN router/access
point closer to each other.
If the ICF (Internet Connection
Firewall) function is active on the
computer, this may prevent the
receiver from connecting to the
computer (only when your computer is
used as a server). You may need to
change the firewall settings to allow
the receiver to connect. (For details on
changing the firewall settings, refer to
the operating instructions supplied
with your computer.)
If you have initialized the receiver or
performed a system recovery on your
server, perform the network settings
again (page 57).
The server (such as a computer) does
not appear in the server list. (“No
Server” appears on the TV screen.)
You may have turned on this receiver
before you turned on the server.
Refresh the server list (page 62).
Make sure that the wireless LAN
router/access point is turned on.
Make sure that the server is turned on.
Confirm that the server has been set
correctly (page 57). Confirm that the
receiver has been registered to the
server and allows the music streaming
from the server.
Confirm that the receiver and the
server are connected to the wireless
LAN router/access point correctly.
Check the network setting information
(page 95).
Home Network
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony STR-DN840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony STR-DN840 in the language / languages: English as an attachment in your email.

The manual is 14,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony STR-DN840

Sony STR-DN840 Quick start guide - English - 16 pages

Sony STR-DN840 User Manual - Dutch - 124 pages

Sony STR-DN840 Quick start guide - Dutch, Italian, Polish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info