635802
35
Zoom out
Zoom in
Previous page
1/112
Next page
Changing Basic Settings
35
Recording
malfunction may result from setting this
switch to MIC+48V. Check before
connecting the device.
When there is no audio device connected to
an input connector, set the INPUT1/
INPUT2 switch of that connector to LINE
to prevent noise.
To record by using an external microphone
1. Open the cover by pulling the handle of the
microphone fixing clamper/microphone
holder.
2. Attach a microphone, then fix it by closing
the cover of the microphone fixing clamper/
microphone holder.
3. Connect the microphone cable to the AUDIO
INPUT1/AUDIO INPUT2 connector (A/
B).
4. Set the CH-1 (INT MIC/EXT/MI SHOE)
switch E and CH-2 (INT MIC/EXT/MI
SHOE) switch J to EXT.
When “INPUT CH Select” in “Audio Input”
of the Audio menu is set to “INPUT1/
INPUT2,” the sound from the AUDIO
INPUT1 connector will be recorded on CH-1
and the sound from the AUDIO INPUT2
connector will be recorded on CH-2.
When “INPUT CH Select” is set to
“INPUT1/INPUT1,” the sound from the
AUDIO INPUT1 connector will be recorded
on both CH-1 and CH-2.
5. Set the INPUT1/INPUT2 switch.
6. Set the input level of the microphone.
• Set the input level of the microphone with
“INPUT1 Reference/INPUT2 Reference” in
“Audio Input” of the Audio menu
(page 73). Adjust according to the
sensitivity of the microphone.
• When you use a stereo microphone (2 XLR
plugs), connect the L (left) channel plug to
the AUDIO INPUT1 connector, and the R
(right) channel plug to the AUDIO INPUT2
connector. Set the CH-1 (INT MIC/EXT/
MI SHOE) and CH-2 (INT MIC/EXT/MI
SHOE) switches to EXT.
Setting the headphone sound
You can select the channel to output from the
headphone by setting the HEADPHONE
MONITOR switch to CH-1 or CH-2, to output
from the headphone.
See “Headphone Out” in “Audio Output” of
Audio menu for details about the sound when set
to STEREO MIX (page 73).
Setting the timecode
Specify the timecode to be recorded with
“Timecode” in the TC/UB menu (page 78).
Displaying the time data
Pressing the DISPLAY button displays the time
data on the screen (page 15).
The indication is switched among the timecode,
user bits, and recording duration each time you
press the DURATION/TC/U-BIT button
(page 11).
Time data
Display Contents
TCG **:**:**:** Timecode
CLK **:**:**:** Timecode (Clock mode)
UBG ** ** ** ** User bits
DUR **:**:** Duration from the beginning of
recording
35


Need help? Post your question in this forum.

Forumrules
1

Forum

sony-pxw-x160

Reset search

  • After resetting my sony pxw-x160 whenever i try to record on as sd card it says clip number limit reached Submitted on 13-12-2021 at 12:34

    Reply Report abuse
    • Please given me price..
      1-487-447-11 switch block, control
      alaminsajb@gmail.com
      Answered on 19-1-2022 at 12:17

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony PXW-X160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony PXW-X160 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info