635802
37
Zoom out
Zoom in
Previous page
1/112
Next page
Useful Functions
37
Recording
You can review the last recorded clip on the
screen (Rec Review).
Press the REC REVIEW button (page 6)
after you stop recording.
You can use an assignable button (page 36) by
assigning the Rec Review function to an
assignable button.
Rec Review stops at the end of the clip, then
resumes the STBY (recording standby) status.
To stop Rec Review
Press the REC REVIEW button, STOP button, or
assignable button assigned to the Rec Review
function.
Notes
The playback control buttons other than the record
button do not work during the Rec Review playback.
Rec Review does not work when changing the video
format after recording.
The Setup menus cannot be operated during Rec
Review.
Normally, a clip is created as an independent file
each time you start and stop recording. However,
this function allows you to start and stop
recording while continuously recording to the
same clip, for as long as the function remains
enabled. This is convenient when you do not want
to generate a large number of short clips, and
when you want to record without worrying about
exceeding the clip limit. It is still easy to find
recording start points, because a Rec Start mark is
recorded at the recording start point each time you
start recording.
For details about the recording format that is
compatible with Clip Continuous Rec, see
“Special Recording and Compatible Formats”
(page 92).
Settings before shooting
Perform the setting with “Clip Continuous Rec”
(page 79) of the Recording menu in advance.
The Clip Continuous Rec function is enabled and
“Cont” appears on the screen (page 15) by setting
“Setting” to “On.”
Notes
The Clip Continuous Rec function cannot be used at
the same time as the Slow & Quick Motion function.
When you set Clip Continuous Rec to on, the Slow &
Quick Motion function is disabled.
The Clip Continuous Rec function cannot be set to on
during recording.
To shoot in Clip Continuous Rec mode
Start the recording after completing the required
setting.
Press the record button.
When recording starts, the “Cont” indication on
the screen changes to the “zRec” indication (z
is red).
Notes
During recording or in recording standby mode (when
the “Cont” indication is lit), if you remove the SxS
memory card, the battery, or the power source, the SxS
memory card needs to be restored. Exit Clip
Continuous Rec mode and then remove the SxS
memory card. When the “Cont” indication is flashing
(at 1 flash/s), you can remove the SxS memory card.
Stop the recording after the recording continues for
two or more seconds.
To exit Clip Continuous Rec mode
With the camcorder in recording standby mode,
set “Setting” in “Clip Continuous Rec(page 79)
of the Recording menu to “Off.”
Limitations
A single continuous clip cannot be created if you
perform one of the following operations while the
camcorder is recording or in recording standby
mode. A new clip will be created when you next
start recording.
Operate on a clip (lock, delete, or rename a clip)
Change the memory card slot
Change the recording format
Turn the camcorder off by setting the power
switch to off
Display the thumbnail screen
•Play a clip
Stop the Clip Continuous Rec mode
Rec Review
Clip Continuous Rec
37


Need help? Post your question in this forum.

Forumrules
1

Forum

sony-pxw-x160

Reset search

  • After resetting my sony pxw-x160 whenever i try to record on as sd card it says clip number limit reached Submitted on 13-12-2021 at 12:34

    Reply Report abuse
    • Please given me price..
      1-487-447-11 switch block, control
      alaminsajb@gmail.com
      Answered on 19-1-2022 at 12:17

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony PXW-X160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony PXW-X160 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info