635802
34
Zoom out
Zoom in
Previous page
1/112
Next page
Changing Basic Settings
34
Recording
The following connectors, switches and dials
allow you to set the sound to be recorded.
External audio input connectors and switches
AUDIO INPUT1 connector A
AUDIO INPUT2 connector B
INPUT1 switch D
INPUT2 switch C
Audio source switches
CH-1 (INT MIC/EXT/MI SHOE) switch E
CH-2 (INT MIC/EXT/MI SHOE) switch J
Recording level controls
AUTO/MAN (CH-1) switch
F
AUTO/MAN (CH-2) switch I
AUDIO LEVEL (CH-1) dial G
AUDIO LEVEL (CH-2) dial H
Using the internal microphone
The sound will be recorded in stereo when using
the internal microphone. To adjust the input
volume of the internal microphone, perform the
following steps.
1. Set the CH-1 (INT MIC/EXT/MI SHOE)
switch E and CH-2 (INT MIC/EXT/MI
SHOE) switch J to INT MIC.
The left and right channels can be controlled
together by using the CH-1 switch and dial
for setting the recording level.
2. Set the AUTO/MAN (CH-1) switch F of
the channel to be adjusted to MAN.
appears on the screen.
3. Adjust the microphone volume by turning the
AUDIO LEVEL (CH-1) dial G of the
channel to be adjusted during recording or
standby.
To return to auto level adjusting
Set the AUTO/MAN (CH-1) switch F of the
channel that is adjusted manually to AUTO.
If the recording level is low, set “INT MIC
Sensitivity” in “Audio Input” of the Audio
menu to “High” (page 73).
To reduce wind roar, set “INT MIC Wind
Filter” in “Audio Input” of the Audio menu to
“On” (page 73).
Recording sound via an external
microphone or audio device
ECM-673 Electret Condenser Microphone or
other devices can be connected and used for
recording.
1. Select the input source.
Set the INPUT1/INPUT2 switch according
to the devices connected to the AUDIO
INPUT1/AUDIO INPUT2 connector.
If you connect a device that does not
support +48V phantom power, a
Audio setup
Audio devices Switch
position
External audio device (mixer,
etc.)
LINE
Dynamic microphones or
microphones with a built-in
battery
MIC
+48V power (Phantom power)
microphone
MIC+48V
34


Need help? Post your question in this forum.

Forumrules
1

Forum

sony-pxw-x160

Reset search

  • After resetting my sony pxw-x160 whenever i try to record on as sd card it says clip number limit reached Submitted on 13-12-2021 at 12:34

    Reply Report abuse
    • Please given me price..
      1-487-447-11 switch block, control
      alaminsajb@gmail.com
      Answered on 19-1-2022 at 12:17

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony PXW-X160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony PXW-X160 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info