Manual Sony PS2_SCPH39001N (page 13 of 92) (English, French, Spanish)

15012

Zoom out

Zoom in

1/92

You can connect the PlayStation

2 console to a

network through the NETWORK connector on

a network adaptor installed in the

PlayStation

2 console.

You can connect to a 100 mbps network using

100Base-TX cable or to a 10 mbps network

using 10Base-T cable. For details, refer to the

instructions supplied with the network device

you are connecting to (such as a router, DSL

modem or cable modem).

Warning

There is a protective sticker on the network connector

to help prevent accidental connection of the wrong

type of cable. Remove the sticker the first time you use

the network connector. After you have removed the

sticker, be careful not to connect cables of the wrong

type to the network connector.

Do not connect network cables or telephone cords of the

following types to the network connector; too much

electrical current may pass through the connector, causing

a malfunction, excessive heat or fire in the connector:

• Network cables of types other than 100Base-TX and

10Base-T

• Normal telephone lines

• An ISDN (digital) compatible public phone

• A PBX phone

• A home or business telephone network phone

• Other types of telephone lines

Connecting the network adaptor with a network cable

Removing the network adaptor from the console

The network adaptor can be removed from the

console. It should only be removed for the

purpose of installing an authorized expansion

bay peripheral.

Caution

• For safety reasons, turn off the console using the

main power switch on the console rear, and

disconnect the power plug for the console from the

electrical outlet before removing the network

adaptor.

• The network adaptor serves as a protective cover

for the expansion bay and the expansion bus

connector, which is located within the expansion

bay. Do not leave the expansion bay uncovered for

an extended period of time. If your network

adaptor is lost or damaged, or for any questions or

problems concerning the network adaptor, contact

our technical support line at 1-800-345-7669.

• Do not connect any unauthorized internal

peripheral to the network adaptor, and do not

insert foreign objects into the expansion bay. Doing

so may damage the console, or cause a malfunction.

1 ... Check that the 1 (standby) indicator on

the PlayStation

2 console front is lit up in

red, and turn off the PlayStation

2 console

using the MAIN POWER switch on the

console rear.

2 ... Disconnect the power plug for the

PlayStation

2 console from the electrical

outlet.

3 ... Disconnect the telephone cord and/or

network cable from the network adaptor.

Note

The network adaptor included in the PlayStation

online pack is intended only for use with the

PlayStation

2 console provided.

Network adaptor

PlayStation®2

console rear

Mounting screw

4 ... Loosen the mounting screws.

Turn the mounting screws in a

counterclockwise direction using a coin.

Note

Do not use a screwdriver to loosen the mounting

screws.

5 ... Remove the network adaptor from the

console.

Remove the network adaptor by pulling it

away from the console.

Connection

Note

When you connect to a network, the Internet service

provider may charge a usage fee. In some cases, the usage

charges may be more than anticipated. For details, refer to

the instructions provided with the software in use or

contact your Internet service provider.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony PS2_SCPH39001N in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony PS2_SCPH39001N Manual

Product: