Manual Sony PS2_SCPH39001N (page 11 of 92) (English, French, Spanish)

15012

Zoom out

Zoom in

1/92

Connecting to a TV with component video input connectors

If your monitor or projector has component

video input connectors (Y, CB/PB, CR/PR),

connect your PlayStation

2 console using the

SCPH-10100 U component AV cable (for

PlayStation

2) (sold separately). This will

provide the best picture.

Before connecting

If you connect your PlayStation

2 console to a

television using the component AV cable

without first setting the “Component Video

Out” option under the “System Configuration”

menu to “Y Cb/Pb Cr/Pr,” the TV screen

might not display properly. Before connecting

your console with the component AV cable,

first use the supplied AV cable (integrated

audio/video) and make sure that the

“Component Video Out” option is set to

“Y Cb/Pb Cr/Pr.”

Note

The PlayStation

2 console is not compatible with HDTV

unless the proper software and connecting devices are

used.

Refer to the instruction manual for your TV for details.

To audio

input

To AV MULTI OUT

connector

To component

video input

connectors

When turning on the console for the first time

The initial setup screen appears.

Set “Language,” “Time Zone” and “Daylight Savings Time

(Summer Time)” according to the instructions on the

screen.

Settings can be adjusted later in the System Configuration

menu. For details, see

“Using the System Configuration

menu” on page 9.

Connection

This section explains how to connect the

PlayStation

2 console to audio equipment with

digital connectors (such as Dolby Digital

optical (AC-3) output). Using digital receivers

and amplifiers, you can enjoy features such as

multi-channel sound and surround sound.

Connecting to a receiver or

amplifier, “MD (Minidisc)” deck

or “DAT (Digital Audio Tape)”

deck with a digital connector

Use a commercially available optical digital

cable (sold separately) and set “DIGITAL OUT

(OPTICAL)” in the System Configuration menu

to “On” (the default setting).

For details on the System Configuration menu,

see page 15.

Notes

• Refer also to the instructions supplied with the

component to be connected.

• You cannot directly make digital audio recordings of

discs recorded in Dolby Digital format or DTS format

using an MD or a DAT deck.

Connecting to an audio

component with a built-in DTS*

or Dolby Digital** decoder

(DVD video only)

By connecting to audio equipment with a built-

in DTS or Dolby Digital decoder (sold

separately), you can playback sound recorded

on your DVD video in Dolby Digital (AC-3) or

DTS format to reproduce the effect of listening

in a movie theater or concert hall.

Connect the component via the DIGITAL OUT

(OPTICAL) connector using an optical digital

cable (sold separately).

Setups for the DVD player on your

PlayStation

2 console

Some setup adjustments are necessary for the

DVD player depending on the components to

be connected.

For details on using the Setup display, see page

23.

• When you connect an audio component with a

built-in DTS decoder

Set “DIGITAL OUT (OPTICAL)” to “On” and

then set “DTS” to “On” in the “Audio Setup”

display.

• When you connect an audio component with a

built-in Dolby Digital decoder

Set “DIGITAL OUT (OPTICAL)” to “On” and

then set “Dolby Digital” to “On” in the

“Audio Setup” display.

Note

Refer to the operating and setup instructions for the audio

components to be connected.

* “DTS” and “DTS Digital Out” are trademarks of Digital

Theater Systems, Inc.

** Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

Connecting digital audio components

MAIN

POWER

AV MULTI OUT

DIGITAL OUT

(OPTICAL)

DIGITAL INPUT

OPTICAL

AC IN

Rear panel

Receiver or amplifier,

MD deck or DAT deck

Audio component

with a built-in DTS

or Dolby Digital

decoder

PlayStation

console

Optical digital cable

(sold separately)

Speakers

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony PS2_SCPH39001N in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony PS2_SCPH39001N Manual

Product: