Manual Sony PS2_SCPH39001N (page 12 of 92) (English, French, Spanish)

15012

Zoom out

Zoom in

1/92

Connecting other digital devices

Connecting a device using the

i.LINK interface

The S400 i.LINK connector on the front of the

console can be used to connect an i.LINK-

compatible (IEEE 1394) device. Refer also to the

instructions supplied with the device to be

connected.

The S400 i.LINK connector does not supply

power to external devices. Some external

devices that require power from the S400

i.LINK connector will not function properly

when connected to the PlayStation

2 console.

The PlayStation

2 S400 i.LINK connector

supports transfer rates up to 400 Mbps.

However, the actual transfer rate will vary,

depending upon the transfer rate of the

connected i.LINK-compatible device.

Note

Not all i.LINK products work with the PlayStation

console. Refer also to the appropriate i.LINK product’s

user manual for more information.

i.LINK is a trademarked version of the IEEE 1394-1995

standard and its revisions.

i.LINK and the i.LINK logo “

” are trademarks.

S400 i.LINK connector

USB connectors

Connecting a device using the

Universal Serial Bus (USB)

interface

The two USB connectors on the front of the

console can be used to connect USB-compatible

devices. Also refer to the instructions supplied

with the device to be connected.

Note

Not all USB-compatible products work with the

PlayStation

2 console. See the appropriate USB-

compatible product’s user manual for more information.

You can connect to a network through a

telephone line by inserting a telephone cord

into the LINE connector on the network

adaptor installed in the PlayStation

2 console.

1 ... Insert a telephone cord (not included) into

the LINE connector of the network

adaptor.

2 ... Plug the telephone cord into a telephone

wall jack.*

* Do not connect any type of cord other

than a home-use phone cord to the LINE

connector.

If you connect a telephone cord or

network cable of a type other than that

specified to the line connector, too much

electrical current may pass through the

connector, causing a malfunction,

excessive heat or fire in the connector.

Never connect phone cords of the

following types (especially a phone cord

for a home or business telephone

network) to the line connector:

•An ISDN (digital) compatible public

phone

•A PBX phone

•A cellular phone or car phone

•A home or business telephone network

phone

Connecting the network adaptor to a phone line

Telephone wall jacks

The network adaptor can be connected to

telephone cords with standard RJ-11C

telephone connectors. In some cases you may

need to use an adaptor to connect to your

phone line. For details, contact your local

telephone company.

Caution

• When you connect to a network you may be

charged a connection fee by the local telephone

company and a usage fee by the Internet service

provider. In some cases, usage charges may be

more than anticipated. For details, refer to the

instructions provided with the software or contact

your Internet service provider.

• If you have call waiting, you may be disconnected

or the software may function abnormally if a call is

received while you are connected to a network.

• When you are using a fax machine or a telephone

on the same line, you will not be able to connect to

a network using the line connector.

• When the network adaptor is connected to a

network, you will not be able to use your phone or

fax machine.

• When the network adaptor is not in use, connect

the phone line to the device it is normally used for.

LINE connector

Telephone cord

Telephone

wall jack

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony PS2_SCPH39001N in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony PS2_SCPH39001N Manual

Product: