157194
22
Zoom out
Zoom in
Previous page
1/31
Next page
masterpage:Left
(3 column)
lename[E:\SEM_Janet\Revision
D
ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]
model name1[MDS-JE480]
[4-238-553-14(1)]
22
GB
Naming a track or an MD (continued)
7 Repeat steps 4 to 6 to enter the rest of
the name.
To change a character
Press m/M repeatedly until the
character to be changed flashes, then repeat
steps 4 to 6.
To erase a character
Press m/M repeatedly until the
character to be erased flashes, then press
CLEAR.
8 Press YES.
The whole name appears in the display,
followed by “
Complete!”.
Naming a track or an MD
using the remote
1 Press NAME EDIT/SELECT depending
on what you want to name:
A flashing cursor appears in the display.
2 Press NAME EDIT/SELECT repeatedly
to select the character type.
Each time you press the button, the display
changes cyclically as follows:
“Selected AB” (Upper cases or symbols
1)
)
t “Selected ab” (Lower cases or
symbols
1)
) t “Selected 12” (Numbers)
1) Only ’ – / , . ( ) : ! ? can be selected.
3 Enter a character using letter/number
buttons.
If you have selected upper cases or
lower cases
1 Press the corresponding letter/number
button repeatedly until the character to
be entered flashes.
Or, press the button once and press
./> repeatedly.
To select symbols, press .
repeatedly while “A” is flashing.
2 Press M.
The flashing character is entered and
lights continuously and the cursor shifts
to the right.
If you have selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts
to the right.
4 Repeat steps 2 and 3 to enter the rest of
the name.
To change a character
Press m/M repeatedly until the
character to be changed flashes, press
CLEAR to erase the character, then repeat
steps 2 and 3.
5 Press YES.
The whole name appears in the display,
followed by “Complete!”.
Renaming a track or an MD
1 Press NAME EDIT/SELECT on the
remote depending on what you want to
rename:
A track or disc name appears in the display.
2 Press CLEAR until the selected name is
erased completely.
3 Do steps 4 to 7 of “Naming a track or an
MD using the controls on the deck” on
page 21 or steps 2 to 4 of “Naming a
track or an MD using the remote” on
this page.
4 Press YES.
The whole name appears in the display,
followed by “Complete!”.
Erasing a track or disc name
Use this function to erase the name of a track or
disc.
1 While the deck is stopped, playing,
recording, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./>
repeatedly) until “Nm Erase?” appears,
then press PUSH ENTER or YES.
To name Press while
A track The track number is displayed
The MD The deck is stopped with the total
number of tracks displayed
To rename Press while
A track The track number is displayed
The MD The deck is stopped with the total
number of tracks displayed
GB02REG-CEL.book Page 22 Wednesday, July 13, 2005 2:56 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony minidisc player mds je480 b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony minidisc player mds je480 b in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info