157194

Sony minidisc player mds je480 b Manual

20
Zoom out
Zoom in
Previous page
1/31
Next page
masterpage:Left
(3 column)
lename[E:\SEM_Janet\Revision
D
ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]
model name1[MDS-JE480]
[4-238-553-14(1)]
20
GB
Dividing recorded tracks (continued)
5 Press PUSH ENTER or YES again if the
dividing point is correct.
“Complete!” appears and the deck starts to
play the newly created track. Note that new
track has no name. If the dividing point is
not correct, adjust the point by turning AMS
(or press ./> repeatedly) while
monitoring the sound, and then press PUSH
ENTER or YES when you locate the desired
dividing point. You can shift the point by 1-
frame
1)
intervals (1 frame = 1/86 second).
1) You can shift the point by 2-frame intervals
on the track recorded in Monaural mode or
LP2 Stereo mode, and by 4-frame intervals
on the track recorded in LP4 Stereo mode.
Tip
In step 5, if you want to shift the dividing point by a
certain number of seconds or minutes, press m/M
repeatedly. You can change the unit by which the
counter advances when you turn AMS (or press
./> repeatedly).
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
You can also use this function to erase
unnecessary track numbers.
Example: Combining track 3 to track 1.
Example: Combining track 1 to track 4.
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./>
repeatedly) until “Combine?” appears,
then press PUSH ENTER or YES.
3 Turn AMS (or press ./>
repeatedly) until the number of the first
track of the two tracks to be combined
appears, then press PUSH ENTER or
YES.
The display for selecting a second track
appears and the deck plays the portion
where joining will occur (the end of the first
track and the beginning of the second track
following it) repeatedly.
4 Turn AMS (or press ./>
repeatedly) until the number of the
second track of the two tracks to be
combined appears, then press PUSH
ENTER or YES.
“Complete!” appears and the deck starts to
play the combined track.
Notes
• Tracks recorded in different modes (stereo, MONO,
LP2 or LP4) cannot be combined.
• If both of the combined tracks have a track name,
the name of the second track is erased.
• If “Impossible” appears in the display, the tracks
cannot be combined because repeated editing has
been done to the track(s). This is a technical
limitation of the MD system and is not a mechanical
error.
Combining recorded
tracks
— Combine Function
12
12
43
3
A
ACBD
BC D
Tr ack
number
Original
tracks
After
COMBINE
12
12
43
3
4
5
A
BC D A
BC D
Original
tracks
After
COMBINE
GB02REG-CEL.book Page 20 Wednesday, July 13, 2005 2:56 PM
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony minidisc player mds je480 b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony minidisc player mds je480 b in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info