Manual Sony minidisc player mds je480 b (page 19 of 31) (English)

157194

Zoom out

Zoom in

1/31

Editing Recorded MDs

lename[E:\SEM_Janet\Revision

ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]

model name1[MDS-JE480]

[4-238-553-14(1)]

masterpage:Left

(3 column)

4 While monitoring the sound, press

PUSH ENTER or YES at the starting

point of the portion to be erased (point

A).

“-Rehearsal-” and “Point A ok?” alternate in

the display and the deck repeatedly plays a

few seconds of the track before the point A.

5 Press PUSH ENTER or YES again if

point A is correct.

“Point B set” appears in the display and

playback for setting the ending point of the

portion to be erased (point B) starts.

If point A is not correct, adjust point A by

turning AMS (or by pressing ./>

repeatedly) while monitoring the sound , and

then press PUSH ENTER or YES when you

locate the desired starting point. You can

shift the point by 1-frame

intervals

(1 frame = 1/86 second).

6 Continue playing the track or press M

to locate the ending point of the portion

to be erased (point B), then press PUSH

ENTER or YES.

“A-B Ers” and “Point B ok?” alternate in the

display and a few seconds of the track before

point A and after point B play back

repeatedly.

7 Press PUSH ENTER or YES again if

point B is correct.

“Complete!” appears in the display for a few

seconds and then the portion between point

A and point B is erased.

If point B is not correct, adjust point B by

turning AMS (or by pressing ./>

repeatedly) while monitoring the sound, and

then press PUSH ENTER or YES when you

locate the desired ending point. You can

shift the point by 1-frame

intervals

(1 frame = 1/86 second).

2) You can shift the point by 2-frame intervals on

the track recorded in Monaural mode or LP2

Stereo mode, and by 4-frame intervals on the

track recorded in LP4 Stereo mode.

Tip

In step 5 and 7, if you want to shift point A or point B

by a certain number of seconds or minutes, press

m/M repeatedly. You can change the unit by

which the counter advances when you turn AMS (or

press ./> repeatedly).

Note

If “Impossible” appears in the display, you cannot

erase a portion of a track. This happens when you have

edited the same track many times.

This is due to a technical limitation of the MD system

and is not a mechanical error.

You can use this function to mark track

numbers after recording. The total number of

tracks increases by one and all the tracks

following the divided ones are renumbered.

Example: Dividing track 2 into two tracks.

Dividing a track after

selecting the track

1 While the deck is stopped, playing, or

paused, press MENU/NO.

“Edit Menu” appears in the display.

2 Turn AMS (or press ./>

repeatedly) until “Divide?” appears,

then press PUSH ENTER or YES.

Play starts.

3 Turn AMS (or press ./>

repeatedly) until the number of the track

you want to divide appears

4 While monitoring the sound, press

PUSH ENTER or YES at the dividing

point.

“-Rehearsal-” appears in the display and the

deck repeatedly plays a few seconds of the

track before the dividing point.

Dividing recorded tracks

— Divide Function

continued

12 3

123 4

AB C D

Tr ack

number

Original

tracks

After

DIVIDE

Divide track 2 into

track B and C

GB02REG-CEL.book Page 19 Wednesday, July 13, 2005 2:56 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony minidisc player mds je480 b in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony minidisc player mds je480 b Manual

Product: