157194
23
Zoom out
Zoom in
Previous page
1/31
Next page
Editing Recorded MDs
lename[E:\SEM_Janet\Revision
D
ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]
model name1[MDS-JE480]
[4-238-553-14(1)]
masterpage:Left
(3 column)
23
GB
3 Turn AMS (or press ./>
repeatedly) until the number of the track
(when erasing the track name) or “Disc”
(when erasing the disc name) flashes,
then press PUSH ENTER or YES.
“Complete!” appears.
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level.
When changing the recording level, you can
select Fade-in Recording to gradually increase
the signal level at the start of recording, or
Fade-out Recording to gradually decrease the
signal level at the end of recording.
Changing the overall
recording level
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./>
repeatedly) until “S.F Edit?” appears,
then press PUSH ENTER or YES.
3 Turn AMS (or press ./>
repeatedly) until “Tr Level?” appears,
then press PUSH ENTER or YES.
4 Turn AMS (or press ./>
repeatedly) until the track number you
want to change the recording level
appears, then press PUSH ENTER or
YES.
5 While monitoring the sound, turn AMS
(or press ./> repeatedly) to
change the recorded level without
turning on the “OVER” indicators on the
peak level meters.
6 Press PUSH ENTER or YES.
“(S.F) Edit OK?” appears in the display.
7 Press PUSH ENTER or YES again.
The deck starts recording over the existing
track. “S.F Edit(:) ** %” appears while the
track is being recorded. When recording
over the track, the amount of time required
is roughly equal to or longer than the
playback time of the track. When the
recording finishes, “Complete!” appears.
Fade-in and Fade-out
Recording
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./>
repeatedly) until “S.F Edit?” appears,
then press PUSH ENTER or YES.
3 Turn AMS (or press ./>
repeatedly) until “Fade In?” or “Fade
Out?” appears, then press PUSH
ENTER or YES.
4 Turn AMS (or press ./>
repeatedly) until the track number you
want to change the recording level
appears, then press PUSH ENTER or
YES.
“Time 5.0s” appears in the display.
5 While monitoring the sound, turn AMS
(or press ./> repeatedly) to
change the Fade-in or Fade-out
Recording time.
The deck plays the portion that will be
recorded over using Fade-in or Fade-out
Recording.
You can set the time at any value between
1 second and 15 seconds, in 0.1 second
increments. You cannot set the time longer
than the track.
6 Press PUSH ENTER or YES.
“(S.F) Edit OK?” appears in the display.
7 Press PUSH ENTER or YES again.
The deck starts recording over the existing
track. “S.F Edit(:) ** %” appears while the
track is being recorded. When the recording
finishes, “Complete!” appears.
Changing the recorded
level after recording
— S.F EDIT
Avoid turning on these indicators
continued
GB02REG-CEL.book Page 23 Wednesday, July 13, 2005 2:56 PM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony minidisc player mds je480 b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony minidisc player mds je480 b in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info