680785
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
General information
¾ If the DIP switch is set to OFF; all auxiliary functions are switched off.
¾ Cable length max. 10 m with terminal: 9 + 10, 11 + 12
¾ Cable length max. 30 m with terminal: 5 + 6, 7 + 8
Obstacle recognition (DIP 1, 2 + 3)
Drive behaviour upon opening the door
If the door meets an obstacle (force cut-off) or if the safety input
is interrupted (person triggering the light barrier), this is detected
by the drive system, depending on the position of the DIP switch 1.
DIP switch 1
OFF No response in the event of a safety input interruption.
In the event of a force cut-off, the door is halted.
ON Drive stops door
Drive behaviour upon closing the door
If the door meets an obstacle (force cut-off) or if the safety input
is interrupted (person triggering the light barrier), this is detected by the
drive system, depending on the position of the DIP switches 2 + 3.
DIP switch 2: Safety connection function
OFF Opener contact for light barrier
ON Push-button contact for push-button 2
(partial opening, dened opening and closing)
DIP switch 3: Behaviour of drive with door closing
OFF Drive stops and opens the door a little, reversal
ON Drive stops and opens the door completely
Connecting light barrier
¾ Permissible cable cross-section: max. 0.75 mm².
8
9
10 11
12
7
2
1
ON
DIP
3
4
5
6
8
7
+
NO
COM
NO
TX RX
COM
Terminal 7 + 8 Safety connection, only if DIP switch 2 OFF
Terminal 9 + 10 controlled DC 24 V, max. 0.1 A
Terminal 9: DC 24 V
Terminal 10: Earth
Settings: See chapter “Functions and connections – obstacle recognition
(DIP 1, 2 + 3)”.
Connecting push-button 2 (DIP 2)
¾ Permissible cable cross-section: max. 0.75 mm².
CAUTION!
Use the contact only for potential-free normally closed
contacts. External voltage may damage or even destroy
the control unit.
Connect push-button 2 if the functions described below are required:
dened opening and closing
partial opening
NOTE!
When using push-button 2 there is no further safety
connection available.
8
9
10 11
12
7
2
1
ON
DIP
3
4
5
6
8
7
Terminal 7 + 8
Connection for push-button 2, only if DIP switch 2 ON
Connecting warning lamp (DIP 4)
¾ Permissible cable cross-section: max. 0.75 mm².
8
9 10
11
12
7
2
1
ON
DIP
3
4
5
6
8
7
Terminal 11 + 12 uncontrolled DC 24 V (max. 34 Volt), max 1 A
DIP switch 4
OFF connected warning lamp ashes (control unit generates ashing)
ON door status indicator
is lit when door is not closed
is out when door is closed
Functions and connections
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Sprint Evolution at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Sprint Evolution in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Sprint Evolution

Sommer Sprint Evolution User Manual - German - 28 pages

Sommer Sprint Evolution User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info