680785
18
Zoom out
Zoom in
Previous page
1/28
Next page
Operation/handling
18
Programming of hand-held transmitter
1. Press the programming key (1)
1 x for channel 1, LED (3.1) is on
2 x for channel 2, LED (3.2) is on
If no other code signal is transmitted within 10 seconds, the radio
receiver switches to standard operation.
2. Press and hold desired hand-held transmitter key (5) until the LED
(3.1/3.2) is off (depending on the selected channel).
The LED is off – the programming process is completed.
The hand-held transmitter has transmitted the radio codes
to the radio receiver.
3. Continue with programming the other hand-held transmitters.
To do this, repeat the above steps. The maximum number of memory
blocks is 112 per radio receiver.
Aborting programming:
repeatedly press the programming key (1) until all LEDs are off.
Deleting the hand-held transmitter key
from the radio receiver
If a user of a multi-user garage facility moves house and wants to take
his manual remote control with him, then all the codes of the given user's
manual remote control have to be deleted from the radio receiver.
For security reasons, each key and each key combination of the hand-held
transmitter should be deleted!
1. Press and hold the programming key (1) for 5 seconds.
An LED ashes (doesn´t matter which).
2. Release the programming key (1).
Radio receiver is in delete mode.
3. Press a key on the hand-held transmitter, the code of which is required
to be deleted.
LED goes out. Deletion process complete.
4. Repeat procedure for all the keys and key combinations.
Deleting a channel from the radio
receiver
1. Press and hold the programming key (1).
1 x for channel 1, LED (3.1) is on
2 x for channel 2, LED (3.2) is on
After 5 seconds, the LED (3.1 or 3.2) ashes.
After another 10 seconds, the LED is constantly on (3.1 or 3.2).
2. Release the programming key (1).
Deletion process complete.
Clearing radio receiver memory
If a hand-held transmitter is lost, then for security reasons all channels on
the receiver have to be deleted! After this has been done, all the hand-held
transmitter controls must be re-set into the receiver.
1. Press and hold the programming key (1).
After 5 seconds, the LED (3.1 or 3.2) ashes.
After another 10 seconds, the LED is constantly on (3.1 or 3.2).
After a total of 25 seconds, all LEDs are on (3.1 + 3.2).
2. Release the programming key (1). All channel data has been deleted.
Connecting an external aerial
An external aerial can be tted if the possible range with the radio receiver's
internal aerial is insufcient.
Connect the external aerial (6) to the terminal (4), see chapter “Operation/
handling – description of display and push-buttons”.
The aerial cable must not exert any mechanical load on the radio receiver.
Fit strain relief.
What is push-button 2 used for?
Dened opening and closing (2-channel operation). This enables the door
to be opened using one push-button, and closed using another.
Should this function be used, a 2nd push-button can be connected.
For settings see chapter “Functions and connections – connecting
push-button 2” as well as chapter “Functions and connections – dened
opening and closing (DIP 7)” and “partial opening (DIP 8)”.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Sprint Evolution at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Sprint Evolution in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Sprint Evolution

Sommer Sprint Evolution User Manual - German - 28 pages

Sommer Sprint Evolution User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info