Manual Sommer Sprint 550SL (page 20 of 36) (English)

474211

Zoom out

Zoom in

1/36

Commissioning

Checking emergency release

With sectional doors, or doors with ceiling guides, you have the

option of activating the backjump with DIP switch 6 in order to

offload the operator and door mechanisms.

• Close the door with the drive.

• Pull the emergency release (N) 1x.

If the emergency release cannot be operated, loosen the end switch

(V) and move it in direction (1).

• Open the door with the drive and close it again. Test the emergency

release again.

Checking force setting

Whenever the door is opened or closed, the control unit compares the

memorised force setting with the force actually needed and automatically

adjusts the memorised setting accordingly when the given final travel

position is reached.

For checking details see 'Maintenance and Care' section.

Programming of remote control

Prior to the initial programming of the hand-held transmitters,

clear the memory of the radio receiver.

Clearing radio receiver memory

• Press and hold the programming key (1).

- After 5 seconds, the LED (3.1 or 3.2) flashes. After another

10 seconds, the LED is constantly on (3.1 or 3.2).

- After 25 seconds, all LEDs are on (3.1 + 3.2).

• Release the programming key (1). All channel data has been

deleted.

Programming the radio transmitter

• Press the programming key (1)

- 1x for channel 1; LED (3.1) is on

- 2x for channel 2, LED (3.2) is on

- If no other code signal is transmitted within 10 seconds, the radio

receiver switches to standard operation.

- Aborting programming: repeatedly press the programming key (1)

until all LEDs are off.

• Press and hold desired hand-held transmitter key (5) until the LED

(3.1 / 3.2) is off (depending on the selected channel).

• The LED is off - the programming process is completed.

The hand-held transmitter has transmitted the radio codes to the

radio receiver.

3.1

3.2

3.1

3.2

Continue with programming the other hand-held transmitters. To do this,

repeat the above steps. The maximum number of memory blocks is 112

per radio receiver.

Attaching instruction label

• Attach the instruction label for the operation of the emergency

release to the emergency release rope.

Attaching warning sign

• Attach the warning signs (text + triangle sign) at a position where

they are clearly visible, e.g. beside the push-button (warning triangle)

and on the door leaf (text + warning triangle).

46502V000-172006-0-OCE_Rev.A

1x1x1x

46502V000-172006-0-OCE_Rev.A

Hi I have a sprint 550sl overhead door opener. The light keeps flashing I can close the door with the wall switch or the hand remote but I cannot open the door it is just no reaction whatsoever with the wall or the hand remotes totally dead. Can you possibly suggest what could be causing the problem. Many thanks. Submitted on 5-7-2023 at 12:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Sprint 550SL in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Sprint 550SL

Sommer Sprint 550SL User Manual - German - 37 pages

Sommer Sprint 550SL User Manual - Dutch - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sommer Sprint 550SL Manual

Product: