680782
60
Zoom out
Zoom in
Previous page
1/88
Next page
60
S10931-00001_Rev-D_EN
Opening, closing and stopping the door
1. Press the button (1) to open and close.
The door opens or closes depending on the
starting position.
2. Press the button (1) during the opening or closing
process.
The door stops:
3. Press the button (1) again.
The door moves into the respective starting
position.
Turning the lighting on and off
The button (2) lights up green when the Wallstation is
ready for operation and the operator is not locked.
1. Press the button (2).
Operator lighting switched on
2. Pressing the button (2) again switches the operator
lighting back off.
Operator lighting off.
INFORMATION
If the operator lighting is not switched off
manually, it switches off automatically after
60 minutes. This value can be changed via
SOMlink and a WiFi-enabled device.
The lighting cannot be switched off when the operator
is moving.
Locking or unlocking the operator
Unauthorised access can be prevented by locking
the operator. For example in the absence of the user
or to prevent unintentional activation with a handheld
transmitter.
The following functions are deactivated in the factory
settings when the lock button is activated:
Radio (handheld transmitter)
Senso ventilation function
Command device (corded external button)
To lock:
The button (2) on the Wallstation lights up green when
the operator is unlocked. The button (2) lights up red
when the operator has been locked by the Wallstation.
1. Press and hold the button (3) for at least 5 seconds
with the door closed.
Button(2)ashesgreen.
After 5 seconds, button (2) lights up red.
Locking function activated.
All the functions of the operator are locked.
INFORMATION
If the door was still open, it can be closed
using the handheld transmitter. Only then
are all operator functions locked.
To unlock:
1. Press the button (3) for at least 5 seconds.
Button(2)ashesred.
Button (2) lights up green.
Locking function deactivated.
All the functions of the operator are activated
again.
INFORMATION
All locking and unlocking functions can
be modied and adjusted with SOMlink
and a WiFi-enabled device. For more
information, ask your specialist dealer.
11.9 Conex
Two corded external buttons can be connected to the
KEYPAD connection with the Conex accessory part.
The function of the external buttons can be configured
via DIP switch 1 of the wall control unit. The factory
setting of DIP switch 1 is "OFF."
KEYPAD
1
Fig. Keypad connection
The Conex accessory part is plugged into the KEYPAD
slot, see separate "Conex" instructions.
DIP switches on
the wall control
unit
OFF
ON
1
ON
1
23
4
"Conex"
additional
circuit board
T1denes
door OPEN
T2denes
door CLOSE
"Conex"
additional
circuit board
T1 pulse
sequence
T2 lighting
function/partial
opening
11. Connections and special functions of the wall
control unit
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9080 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9080 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9080 pro

Sommer S 9080 pro User Manual - German - 88 pages

Sommer S 9080 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info