680825
52
Zoom out
Zoom in
Previous page
1/96
Next page
52
S10564-00001_Rev-A_EN
10. Connections and special functions of the carriage
INFORMATION
All operator parameters are reset to
the factory settings by a factory reset.
All settings by SOMlink and WLAN-enabled
device are also reset.
The DIP switches can only be manually
reset.
Reset of the safety device
1. Press the green reset button for 1 second.
Reset of the safety inputs.
Subsequently attached safety inputs are detected.
Deleting the force values
1. Press the green reset button on the carriage for
5 seconds until the green status LED flashes slowly.
Force values are deleted.
Deleting force and position values
1. Press the green reset button on the carriage for
10 seconds until the green status LED flashes quickly.
Force and position deleted.
Frame photo eye deleted.
Factory reset
1. Press the green reset button on the carriage for
15 seconds until the green LED goes out.
Factory settings are restored.
10.14 Setting the DIP switches on the
carriage
Special functions can be set up with the DIP switches on
the carriage.
For compliance with EN 13241-0 before initial operation,
the door type must be selected and set on the carriage
with the DIP switch.
The factory setting of the DIP switches is OFF, which is
applicable for sectional doors.
NOTE
Do not use a metal object to set the
DIP switches, because this may damage
the DIP switches or the circuit board.
Use a suitable tool to set the DIP switches,
such as a at plastic object.
DIP switch on
carriage
ON
OFF
1
ON
1
2
3
4
Automatic
closing function
activated
Automatic
closing function
deactivated
2
ON
1
2
3
4
Partial opening
activated
Partial opening
deactivated
3+4
ON
1
2
3
4
3
ON
1
2
3
4
4
ON
1
2
3
4
10.15 Setting the automatic closing
function
When automatic closing is activated, the door is opened
by a pulse.
The door moves to the door OPEN end position.
The door closes automatically after the open holding
time. With the factory settings, the door also closes
automatically from the partial opening position when the
automatic closing function is activated.
If a photo eye is connected, the "Automatic closing"
operating status is activated as a requirement.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga

Sommer S 9060 Tiga User Manual - German - 96 pages

Sommer S 9060 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info