680828
68
Zoom out
Zoom in
Previous page
1/100
Next page
68
S10557-00001_Rev-A_EN
11.8 Connection options for control
device
IN button and OUT button
External control devices can be connected to the control
unit, for example buttons, pull buttons or key switches.
A separate input is available for the interior and exterior
request sides. The connection is potential-neutral.
IN button
OUTIN
SAF
OUT
SAF
Fig. IN button
If the IN contact is activated, the command of the interior
request side is executed:
Status LED lights up orange during the activation.
Operator opens the door to the door OPEN end
position.
Interior: Green phase.
Exterior: Red phase.
The door closes automatically after the open
holding and clearing time.
OUT button
OUTIN
SA
F
SAF
IN
Fig. OUT button
If the OUT contact is activated, the command of the
exterior request side is executed:
Status LED lights up orange during the activation.
Operator opens the door to the door OPEN end
position.
Interior: Red phase.
Exterior: Green phase.
The door closes after the open holding and
clearing time have run out.
CLOCK IN or CLOCK OUT
A potential-neutral NO contact of an external timer can
be connected to this terminal. This makes it possible to
extend the open holding time by the set time.
If a command comes from the opposite side during
the respective open holding time, the request side is
changed after the set opening holding and clearing time
run out. The opposite side now briefly receives drive
authorisation for the set open holding and clearing time.
After the open holding and clearing time run out, the
request side changes to the original request.
INFORMATION
The "Door does not open with a timer
command until after a pulse" function is
set at the factory. This function can be
changed to the "Door opens immediately
with a timer command" function using a
DIP switch.
Set DIP switch 2 of the wall control unit
to ON, see Chapter "11.3 Setting the DIP
switches on the wall control unit".
CLOCK IN for interior request side
CLOCK
IN
OUT
CK
OUT
Fig. Timer connection (CLOCK IN)
This connection is selected to keep the door open for a
certain amount of time in the morning hours. Vehicles can
leave the garage from the interior:
Status LED lights up orange during the activation.
With the rst command, the door opens to the door
OPEN end position.
Interior request side now receives drive
authorisation.
Interior: Green phase.
Exterior: Red phase.
The door remains open until the CLOCK IN contact
is activated.
After the desired time, the contact at the CLOCK IN
connection drops out.
The open holding and subsequent clearing time
restart.
The closing process is automatically initiated after
the open holding and clearing time.
Door closes.
Door CLOSE end position.
11. Connections and special functions of the
wall control unit
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga plus in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga plus

Sommer S 9060 Tiga plus User Manual - German - 100 pages

Sommer S 9060 Tiga plus User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info