680647

Sommer Marathon Tiga 1100 SL Manual

11
Zoom out
Zoom in
Previous page
1/33
Next page
Installation
10
Wear safety goggles when drilling!
Use screws that are suitable for the door material.
• Insert 5 hexagon-head screws (6) and tighten securely.
• Release switch-trigger (4) and push right up to trolley (7).
• Tighten switch-trigger buffer screw (4) securely.
Trim (e.g. saw off and debur) projecting part of ceiling bracket (4).
• Release rear switch-trigger buffer (1) and push right back to stop (2).
Open door (3) by hand.
• Push switch-trigger (1) right up to trolley (5). Securely tighten screw
on switch-trigger (1).
Caution!
After installation, check the drive rail for dirt (e.g. drilling
residue) and clean it, if necessary. Apply a little oil with conduc-
tive properties. See maintenance and care instructions.
Mounting the control unit
Connect to mains voltage according to EN 12453 (all-pole
separating fixture)
• Work on the control unit may only be executed if it is de-energised.
• Dry any moisture that has penetrated with a blower.
• Only qualified electricians may connect the control unit to the mains
supply.
• Always install the control unit housing vertically, with the cable channels
downward, without deformation of the housing, so that water cannot
penetrate and so that the lid forms a watertight seal.
• Only attach the housing using the intended fixing points, do not drill
through the rear wall of the housing. The housing will leak.
Connect the signal light control unit to the operator
Attention!
Always lay the cable separately from the house installation.
Otherwise it is possible that the house installation can influence
the function of the signal light control unit.
Permissible cable cross-sections for all terminals:
0.5 mm
2
... 1.5 mm
2
.
18
190
165
4x
254
90
M16
M20
M16
M16
M20
180
4
N
1
2
6
max. 30°
4
5
3
17
17
Signal light control unit Control unit Operator Cable colour
Terminal Terminal
SIG 0 -> 17 green
SIG 1 -> 19 yellow
SIG 2 -> 24 white
-> 23 brown
Connecting the signal light control unit to the mains
supply
Permissible cable cross-sections for all terminals:
1 mm
2
... 2.5 mm
2
.
Description from left to right
Signal light control unit Mains supply: Input
Terminal
L -> AC 220 ... 240 V
N -> Neutral conductor
PE -> Protective earth
Signal light control unit Mains supply: Voltage tap mains power
Terminal
PE -> Protective earth
N -> Neutral conductor
L -> AC 220 ... 240 V
L
L
N
N
N
N
N
GA
RI
RA
Licht
N
GI
PE
PE
FUSE
5x20
20
19
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
LL
L
NN
NN
N
N
N
GA
RI
RA
Licht
S
IG
0
S
IG
1
S
IG
2
N
GI
PEPE
PEPE
FUSEFUSE
5x205x20
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
12
14
17
13
15
19
24
23
SIG 0
SIG 1
SIG 2
4 x 0,5 ...1,5 mm
2
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Marathon Tiga 1100 SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Marathon Tiga 1100 SL in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Marathon Tiga 1100 SL

Sommer Marathon Tiga 1100 SL User Manual - German - 33 pages

Sommer Marathon Tiga 1100 SL User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info