680561
25
Zoom out
Zoom in
Previous page
1/30
Next page
Functions and connections
t
– 25
Partial opening (DIP 8)
Depending on the setting, this function partially opens the door.
Use examples: airing out the garage, opening the side-sectional door for
personal access, and many others. The partial opening can be used with
two buttons or with hand-held transmitters.
2
1
ON
3
4
5
6
8
7
DIP switch 8
OFF Deactivated
ON Activated, DIP switch 7 non-functional
Partial opening with 2 buttons
Install additional button and connect to terminals 7 + 8 as button 2. Refer to
the chapter “Functions and connections - connecting button 2 (DIP 2)”.
Button 1 always opens the door completely.
If the door is partially opened with button 2, pressing button 1 opens the
door completely.
Button 2 opens the gate partially only if the gate is closed.
If the gate has been completely opened with button 1 or partially
opened with button 2, pressing button 2 again closes the gate.
Procedure
1. Close door.
2. DIP switch 8 ON activates partial opening.
Always leave DIP switch 8 set to ON, the OFF setting immediately
deletes the set partial opening.
3. Press button 2 (open door from CLOSED end position).
Door opens until button 2 is pressed again or the door reaches the
“door OPEN” end position.
4. Press button 2 once the desired position is reached.
5. Close door with button 2.
Partial opening saved and pressing button 2 opens the gate
to the saved position. Set DIP switch 8 to OFF to delete the
partial opening setting.
Partial opening with the hand-held remote control
(2-channel operation)
Programming the 2 buttons of the remote control, e.g. button 1 on radio
channel 1 and button 2 on radio channel 2.
Radio channel 1 always has the same function as button 1.
Radio channel 2 always has the same function as button 2.
Connecting external antenna
As-delivered status: unassigned
2
1
O
N
DIP
3
4
5
6
8
7
6
TorMinal interface
See TorMinal owner’s manual.
2
1
ON
3
4
5
6
7
5
6
Carriage circuit board
5
2
1
4
6
7
8
3
Terminal 1 Chain current draw
Terminal 2 Rail current draw
Terminal 3 + 4 Door OPEN end switch
Terminal 5 Motor cable
Terminal 6 Motor cable
Terminal 7 + 8 Door CLOSE end switch
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Duo vision 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Duo vision 500 in the language / languages: English as an attachment in your email.

The manual is 6,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Duo vision 500

Sommer Duo vision 500 Usermanual and installation guide - German - 30 pages

Sommer Duo vision 500 Usermanual and installation guide - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info