680561
23
Zoom out
Zoom in
Previous page
1/30
Next page
– 23
t
General information
¾ As delivered, DIP switches are set to the “OFF” position, all additional
functions are switched off.
¾ Cable length max. 10 m (at the terminal): 9 + 10, 11 + 12
¾ Cable length max. 30 m (at the terminal): 5 + 6, 7 + 8
Obstacle detection (DIP 1, 2 + 3)
Drive behavior when opening the door
If the door encounters an obstacle (power cut-off) or a safety input is
interrupted (e.g. someone passes through the photo eye), the drive detects
this and reacts according to the setting of DIP switch 1.
DIP switch 1
OFF No reaction during an interruption of a safety input. The door
stops during a power cut-off.
ON The drive stops the door.
Drive behavior when closing the door
If the door encounters an obstacle (power cut-off) or a safety input is
interrupted (e.g. someone passes through the photo eye), the drive detects
this and reacts according to the setting of DIP switches 2 + 3.
DIP switch 2: Function: safety connection
OFF NC contact for photo eye.
ON Button connection for button 2
(partial opening, dened opening and closing).
DIP switch 3: behavior of drive when the door closes.
OFF Drive stops and opens the gate slightly, reversion.
ON The drive stops and opens the door completely.
Connecting photo eyes
¾ Permissible cable gauge: max. 0.75 mm².
8
9
10 11
12
7
2
1
ON
DIP
3
4
5
6
8
7
Terminals 7 + 8 Safety connection, only if DIP switch 2 “OFF”.
Terminals 9 + 10 Regulated DC 24 V, max. 0.1 A
Terminal 9: DC 24 V
Terminal 10: ground
Settings: Refer to the chapter “Functions and connections - obstacle
detection (DIP 1, 2 + 3)”
Connect button 2 (DIP 2)
¾ Permissible cable gauge: max. 0.75 mm².
ATTENTION!
Only use the connection for potential-free closer contacts.
External voltage can damage or destroy the controller.
Button 2 can be used as needed for the following functions:
Dened opening and closing
Partial opening
ALWAYS OBSERVE!
If button 2 is used, a safety connection is no longer available.
8
9
10 11
12
7
2
1
ON
DIP
3
4
5
6
8
7
Terminals 7 + 8 Connection for button 2 only if DIP switch 2 ON
Connect warning light (DIP 4)
¾ Permissible cable gauge: max. 0.75 mm².
8
9
10 11
12
7
2
1
ON
DIP
3
4
5
6
8
7
Terminals 11 + 12 Unregulated DC 24 V (max. 34 V), max. 1 A
DIP switch 4
OFF
Connected warning light is blinking (controller generates blinking).
ON Door status display
Lights up if the door is not closed
Is off if the door is closed
Functions and connections
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Duo vision 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Duo vision 500 in the language / languages: English as an attachment in your email.

The manual is 6,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Duo vision 500

Sommer Duo vision 500 Usermanual and installation guide - German - 30 pages

Sommer Duo vision 500 Usermanual and installation guide - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info