680561
27
Zoom out
Zoom in
Previous page
1/30
Next page
Maintenance and care
t
– 27
Regular testing
Regularly check that the safety devices function correctly; no less than every six months. See EN 12453:2000.
Check that pressure-sensitive safety devices (e.g. safety contact strip with extra evaluation unit) are operating correctly every four weeks
(see EN 60335-2-95).
In particular, check whether the drive reverses correctly when it encounters a 50 mm high obstacle lying on the ground. Correctly adjust if necessary and
recheck; an incorrect setting presents a hazard.
Testing Behavior yes/no Possible cause Remedy
Force cut-off
Try to stop the door wing
while it is closing with
a 50 mm high object.
Does the drive reverse when
it encounters the object?
yes The force cut-off works
without limitations.
Leave all settings as they are.
no Door incorrectly adjusted. Adjust door, call a technician.
Emergency release
Proceed as described in the
chapter “Operation/use -
emergency release”.
The emergency release can
be easily actuated (pull once
and the drive releases).
yes Everything is OK.
no Drive forces the door
closed.
Door and drive
mechanism is stressed.
Emergency release
defective.
Door jams.
Adjust door CLOSE end switch or switch on
Backjump (DIP switch 6 ON).
Repair emergency release.
Check door, see door owner's manual.
Safety contact strip,
if present.
Open and close the door
and actuate the strip at the
same time.
Adjust the behavior of the
door, as set with DIP switch
1, 2 or 3.
yes Everything is OK.
no Cable breakage, terminal
loose.
DIP switch adjusted.
Strip defective.
Check the wiring; retighten the terminals.
Setting the DIP switches.
Decommission the system and lock it to
prevent reactivation. Then, contact customer
service.
Photo eye, if present
Open and close the door
while interrupting the photo
eye.
Adjust the behavior of the
door, as set with DIP switch
1, 2 or 3.
yes Everything is OK.
no Cable breakage, terminal
loose.
DIP switch adjusted.
Photo eye dirty.
Photo eye misadjusted
(holder bent).
Photo eye defective.
Check the wiring; retighten the terminals.
Setting the DIP switches.
Clean the photo eyes.
Adjust photo eyes.
Decommission the system and lock it to
prevent reactivation. Then, contact customer
service.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Duo vision 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Duo vision 500 in the language / languages: English as an attachment in your email.

The manual is 6,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Duo vision 500

Sommer Duo vision 500 Usermanual and installation guide - German - 30 pages

Sommer Duo vision 500 Usermanual and installation guide - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info