680561
16
Zoom out
Zoom in
Previous page
1/30
Next page
Installation
t
– 16
Install the wall socket.
ATTENTION!
Wall sockets may only be installed by a trained electrician.
Protect the wall socket with a circuit breaker (16 A, slow-blow).
Comply with all applicable regulations (e.g. the German VDE).
A/B 27
H
1
3
2
4
C27
Install the socket (1) on the wall at a distance of approx. 0.5 m from the
controller housing (2) for variant A/B, or on the ceiling for variant C.
Install and hook up the connecting line from the socket (1) to the
electrical power mains.
ATTENTION!
Do not plug the power mains plug (3) into the socket yet.
Install and connect the additional
button
ATTENTION!
Only use the connection for potential-free closer contacts.
External voltage can damage or destroy the controller.
NOTE!
Installation of an additional button is only necessary if an
extra one is required apart from the integrated button.
NOTE!
Never lay the cable of the key switch along a power line as
this could cause interference in the control unit.
7
6
3
4
5
Time
Reset
Radio
LED2
LED1
Time
Reset
Radio
LED2
LED1
1,6m
A28
2
1
7
6
3
4
5
Time
Reset
Radio
LED2
LED1
Time
Reset
Radio
LED2
LED1
B28
1,6m
2
1
7
6
3
4
5
Time
Reset
Radio
LED2
LED1
Time
Reset
Radio
LED2
LED1
1,6m
2
1
C28
Install the key switch (1) in a suitable, easily accessible position in the
garage. Minimum height above the ground: 1.6 m.
Install the switch cable (2) in the garage. Connect the end of the cable
to the button (1).
ATTENTION!
Danger due to electric current!
Only touch the controller (4) on the outer edge.
Don't touch the electronic components.
Take off the lamp cover (3). Unscrew the screws (4) and take off the
cover (5). Upwardly pull the controller circuit board (1) out of the base
frame (6).
ATTENTION!
After installation, it is imperative that you check the drive to
ensure that it has been correctly adjusted and that it reverses
upon contacting a 50 mm high object on the oor.
ATTENTION!
After installation, it is imperative to check whether the drive
stops when it encounters a 20 kg load that attached to the
middle of the bottom edge of door.
ATTENTION!
After installation, ensure that no parts of the door protrude
into public sidewalks or streets.
3029
4
1
2
3
4
5
6
1
2
3
4
5
6
3
56
1
3
2
6
5
4
Time
Reset
Radio
LED2
LED1
Time
Reset
Radio
LED2
LED1
NOTE!
Connect any key switches (potential-free NO contact) that are
present in parallel to terminals 5 + 6.
Connect the switch cable (3) to terminals 5 + 6 on the direct
connector (4).
Put the controller circuit board (1) into the base frame (2) and insert into
the direct connector (3). Put the cover (4) in place and fasten with
screws (5). Put the lamp cover (6) in place.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Duo vision 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Duo vision 500 in the language / languages: English as an attachment in your email.

The manual is 6,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Duo vision 500

Sommer Duo vision 500 Usermanual and installation guide - German - 30 pages

Sommer Duo vision 500 Usermanual and installation guide - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info