474213
17
Zoom out
Zoom in
Previous page
1/36
Next page
Installation duo
16
Position, align and the secure control housing using 4 screws (1).
Supplied components 2 plugs, 2 screws.
Slot the control board (1) into terminal bar (2) and slide it into the
housing.
Touch the control unit (3) only at its edge!
Do not touch the electronic components!
Install the control unit (3). Mount the lamp hood (2) and tighten the
screws (1).
Installing the socket Outlet
Socket outlet may only be installed by a qualified electrician.
Protect socket with a fuse (16 A slow-blow).
Observe all applicable regulations (e.g. VDE, etc.)!
Install socket (1) on ceiling at a distance of approx. 0.5 meters to the
control unit housing (2).
Install and connect the connection cable from the socket outlet (1) to
the mains power supply. Do not plug the connector into the socket
outlet yet!
29
2
1
3
28
2
1
2
3
4
5
6
34
1
2
3
4
5
6
55
77
88
44
66
33
22
11
ONON
DIPDIP
22
33
44
55
66
11
1
27
3
4x
27
30
H
30
C30
1
3
2
29
28
Installing and connecting and
additional push-button
Only necessary if a further push-button is required in addition to
the one already installed (1).
Use the contact only for potential-free normally closed contacts.
External voltage may damage or even destroy the control unit.
Position the push-button in such a way that the operator can see
the door, while he/she is not inside the operating area of the
door.
Never run the push-button cable along a power cable as this can cause
the control unit to malfunction.
Install push-button (1) in an appropriate, easily accessible location in
the garage. Minimum height from the floor: 1,6 m
Install button cable (2) in garage. Connect end of cable to push-but-
ton (1).
Only hold outside edge of control board (1)! Do not touch the
electronic components!
Undo screw (3) on control unit housing (6), remove light diffuser (4).
Connect the key switches (potential-free NO contact), if any, to
the terminals 5 + 6.
Lift the control board (1) from the housing (8) and disconnect it from
the terminal bar (2).
Connect the push-button cable (3) to terminals 5 + 6 of the terminal
bar (2).
Slot the control board (1) into terminal bar (2) and slide it into the
housing (8).
Mount the lamp hood (7) and tighten the screw (4).
32
32
7
4
8
3
2
1
2
3
4
5
6
1
2
3
4
5
6
56
55
77
88
44
66
33
22
11
ONON
DIPDIP
22
33
44
55
66
11
1
1,6m
2
1
A31
B31
1,6m
2
1
1,6m
2
1
4
3
6
5
C31
31
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Duo 650SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Duo 650SL in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Duo 650SL

Sommer Duo 650SL User Manual - German - 37 pages

Sommer Duo 650SL User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info