474213
16
Zoom out
Zoom in
Previous page
1/36
Next page
Installation duo
15
Installation option A/B
Choose a suitable location for the installation of the control housing
(1), preferably near a power socket (3).
Minimum height from the floor: 1,6 m.
Please note when selecting location of control unit housing (1)
that the maximum length of the control cable (2) is 6900 mm and
no longer!
Install the control line (24 V) (2) to the control housing (1) in the
garage. Do not yet plug in the power plug (4)!
Mark fixing points horizontally 110 mm apart on the wall. Drill two
holes (Ø 10 x 65 mm). Insert wall plug (1) into the holes in the wall.
Be careful not to drill into the socket outlet feeder and do not
plug the mains plug in yet!
Loosen the strain-relief (1) device at the rear of the control unit.
Insert the end of the control cable (2) into the rear of the control unit
(1). Use the strain-relief (1) device to protect the power cable (3) and
control cable (2).
Connect the control cable (2): connect the core marked 3 (green) to
terminal 3 and the core marked 4 (red) to terminal 4 of direct socket
unit (1). Shorten the control cable (2) if necessary.
In the case of swing doors, connect wire marked 3 (green) to
terminal 4 of the direct socket unit (2) and the one marked 4 (red)
to terminal 3.
Secure the control housing (1) to the wall, using the two screws (2).
Align the control housing (1) and secure it with screws.
27
26
2726
2
1
2
1
1
2
3
4
5
6
34
1
2
3
4
5
6
23
444
333
1,6m
2
1
A23
B23
1,6m
2
33
44
3
4
1
25
24
25
ca150
2
1
3
4
24
110
1
Slot the control board (1) into terminal bar (2) and slide it into the
housing.
Mount the lamp hood (2) and tighten the screw (3).
Installation option C
Choose a suitable location for the installation of the control housing
(1), preferably near a power socket (3).
Please note when selecting location of control unit housing (1)
that the maximum length of the control cable (2) is 6900 mm and
no longer!
Install the control line (24 V) (2) to the control housing (1) in the
garage. Do not yet plug in the power plug (4)!
Drill 4 holes (Ø 6 x 40 mm deep). Place plugs (2) in holes. Included
in delivery. Supplied components 2 plugs, 2 screws.
Be careful not to drill into the socket outlet feeder and do not
plug the mains plug in yet!
Loosen the strain-relief (1) device at the rear of the control unit.
Insert the end of the control cable (2) into the rear of the control unit
(1). Use the strain-relief (1) device to protect the power cable (3) and
control cable (2).
Connect the control cable (5): connect the core marked 3 (green) to
terminal 3 and the core marked 4 (red) to terminal 4 of direct socket
unit (2). Shorten the control cable (5) if necessary.
In the case of swing doors, connect wire marked 3 (green) to
terminal 4 of the direct socket unit (2) and the one marked 4 (red)
to terminal 3.
26
25
26
5
2
1
2
3
4
5
6
34
1
2
3
4
5
6
55
77
88
44
66
33
22
11
ONON
DIPDIP
22
33
44
55
66
11
1
25
ca150
2
1
3
4
28
29
2
3
1
28
2
1
2
3
4
5
6
34
1
2
3
4
5
6
55
77
88
44
66
33
22
11
ONON
DIPDIP
22
33
44
55
66
11
1
24
23
H
1
2
3
4
23
24
3
2
4x
29
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Duo 650SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Duo 650SL in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Duo 650SL

Sommer Duo 650SL User Manual - German - 37 pages

Sommer Duo 650SL User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info