655794

Solo Port 423 Manual

29
Zoom out
Zoom in
Previous page
1/97
Next page
Operation hints
ENGLISH 13
12.2 Spraying
When applying spraying agent, ensure by using
appropriate measures and procedures that the
unintended release of agent to other areas is
minimized and the drift to the surrounding areas
is prevented.
Always proceed with the greatest care when
spraying.
Never use the device under windy conditions or
if it is raining, as this would risk widespread
drifting of the spraying agent.
Check the wind direction before starting work
and select the spraying direction downwind of
the user.
It is best to perform spraying work in the
morning or evening, as it tends to be less windy
then.
Ensure that you only wet what is in fact intended
to be covered with spraying agents.
Never spray the agent towards persons,
animals, open windows or doors, cars or
anything else that could be damaged by the
spraying agent.
Spraying:
Approach the target object with the engine at
idling speed. Accelerate to full engine speed, then
open formula on-off tap.
Wide-range nozzle (7):
When spraying plants and trees we recommend
fixing the wide-range nozzle (7) onto the red
standard nozzle (4). This ensures that a large area
can be sprayed at one time. Push the wide-range
nozzle onto the standard nozzle, until the bead
engages.
In narrow spaces and for aftercare, we
recommend placing the wide-angle grille (7a) onto
the wide-range nozzle. This ensures that the spray
velocity is reduced and the spray is applied more
widespread, to prevent damage to leaves.
Nozzle attachment (6):
The nozzle attachment (6) is positioned onto the
standard nozzle (4) with the selected grille.
Use the dual grille (6a) when spraying cultures in
rows (e.g. vines, tomatoes, nurseries), to achieve a
good covering on the underside of the leaves.
The deflector grille can be replaced with a dual
grille (6b). The dual grille provides a 90° - 110°
spray pattern. The dual grille is usually used for
spraying two rows at a time. The deflector grille
and the dual grille can be placed onto the external
diameter of the nozzle, until the bead engages.
Dual nozzle (accessories, part no.: 49 00 137):
Remove standard nozzle (4) from the spray wand
and push the dual nozzle onto the spray wand.
Fig. 7
Fig. 8
Fig. 9
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo Port 423 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo Port 423 in the language / languages: Dutch, Italian as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Solo Port 423

Solo Port 423 User Manual - English, German, French, Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info