Manual Solo 880 (page 65 of 249) (English, German, Dutch, French, Spanish)

655959

Zoom out

Zoom in

1/249

Preparing for use

ENGLISH 23

Move water supply line attachment upwards

The water supply line must be placed so that

contact between water supply line and

cut-off wheel in operation is excluded in all

positions of the wheel guard.

x Place the water supply line so that it runs on the

outside of the wheel guard and not between the

wheel guard and the assembly flange.

x Push the attachment screws (a) of the water

supply line into the adapter pieces (b).

x Place the adapter pieces on the right and left

sides of the wheel guard above the associated

threaded holes

(p) and screw in the water supply

line attachment screws.

x Loosen the screw (q) of the clamp (r) until the clamp can be moved upwards at the blank spar of the top

handle (s).

x Push the clamp upwards so far that the water supply line can never be in contact with the cut-off wheel.

x Check placement of the water supply line when the wheel guard is rotated all the way to the front and

correct if required.

Install handle for wheel guard adjustment and cut-off wheel again

x Install the handle for wheel guard adjustment (3) again to the wheel guard with the respective

attachment screws.

x Install the cut-off wheel: Î Chap. 5.1, page 16

After production, the power tool is subjected to an inspection and test process that ensures that the motor

is then run in perfectly.

Therefore, no special measures are required for initial start-up.

5.9 Initial starting / run-in behaviour

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 880 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 880 Manual

Product: