658837
26
Zoom out
Zoom in
Previous page
1/46
Next page
Starting / Stopping the engine - Switching the engine off, Hazards caused by kickback
ENGLISH 26
E
N
G
5.4 Switching the engine off
Release the throttle control and move the stop switch to the "Stop" position.
Always make sure that the cutting tool has come to a complete standstill before placing the
machine down.
Tip:
We recommend that users get into the habit of doing the following whenever temporarily switching off
the chainsaw. Once the engine has come to a complete standstill,
o move the stop switch straight back to the operating position, and
o activate the chain brake ready for the subsequent start-up.
This will help to make sure that these steps are not forgotten when the chainsaw is next started.
As a general rule, you should always check the starting settings before every start-up.
Switching the engine off in the event of a malfunction:
If – due to a malfunction of the stop switch – it is not possible to switch the engine off, you can also
close the choke flap (choke pulled out) to bring the engine to a standstill..
Caution – the chainsaw runs at part throttle in the process!
In this case do not restart the tool – have it checked out immediately by a specialist workshop
instead!!
6. Hazards caused by kickback
When working with the chainsaw, careless or incorrect working methods can cause a
dangerous situation which is referred to as "kickback". Kickback forces can occur when the
running saw chain comes into contact with solid objects or if the saw chain suddenly gets
stuck in the cut. In the process, the chainsaw is accelerated violently and uncontrollably.
Depending on the contact point of the running saw chain, the forces acting on the chainsaw are
directed as follows, resulting in the corresponding acceleration of the tool:
1. Contact point (or sticking point during a cut) at the tip of the guide rail:
Danger:
The guide bar is kicked up suddenly and quickly.
As the user is holding the chainsaw by the handles, this
results in a rotational acceleration of the chainsaw, during
which the guide bar is accelerated towards the head of the
operator.
Although this rotational acceleration instantly activates the
chain brake, the magnitude of the acceleration and the
uncontrolled response of the operator can result in serious
accidents.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 651 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 651 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info