Manual Solo 106 (page 30 of 100) (English, German, Dutch, French, Italian, Spanish)

634115

Zoom out

Zoom in

1/100

8.2 Replacing the cutting line (model 105)

FIG. 23

1. Press down on the tabs and turn the bottom

part of the line head in the direction of the arrow.

2. Remove the bottom part of the line head

and the line spool from the upper part of the

line head. Ensure that the spring remains in

the spool.

FIG. 24

3. Cut off a maximum of 4 m from the cutting

line spool. Near the centre of the spool, kink

approx. 5 – 10 cm of the cutting line.

FIG. 25

4. Insert the line through the hole provided in

the spool and pull it up to the kink through

the hole.

FIG. 26

5. Tightly wind both ends of the line anti-

clockwise onto the spool. You may also tightly

hold the cutting line and wind the spool clock-

wise. When the cutting line shows a residual

length of approx. 10 – 20 cm, wedge both

ends temporarily, respectively at opposite

sides, into the slots at the bottom of the spool.

This prevents the cutting line unwinding dur-

ing the next step. Both lines must not be iden-

tical in length; excess will be trimmed auto-

matically by the contact protection shield.

FIG. 27

6. Guide both wedged-in line ends through

both opposite eyelets in the line head top.

Remove both ends of the line from the slots,

where they were temporarily wedged in, and

guide the spool with spring into the line head

top.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 106 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 106 Manual

Product: