634115

Solo 106 Manual

28
Zoom out
Zoom in
Previous page
1/100
Next page
28
7.2 Setting half throttle (model 106B)
Grip the multi-function handle, activate the
throttle lever (1), locate the sliding switch (2)
in the start position and release the throttle
lever. This is the half throttle or start position.
FIG. 18
2
1
7.3 Starter shutter adjustment
2.The starter shutter (1) is to be adjusted as
follows closed if the motor is cold,
open when the motor is warm.
When first starting or if the fuel tank has been
run empty and has been refilled, press the
primer (2) several times (at least 5x) until the
fuel is visible in the plastic bulb.
Ä ˇˇÄ
FIG. 19
2
1
7.4 Starting
1. Lay the motor scythe evenly and without
obstructions on the ground.
Take up a safe position, securely hold the machine
and ensure that the cutter does not touch any
objects or the ground. During starting, never stand
or kneel on the shaft tube, otherwise the shaft or
the tube might be damaged.
FIG. 20
Slowly pull the starter handle until you first feel resistance.
Then pull the starter handle quickly and forcefully in a
straight line from the rope guide. Do not jam the cord on
the cord guide, or pull the starter cord to the end-stop,
otherwise it might break. Slowly return the starter handle.
7.5 If the motor does not start
1. If, in spite of several attempts, the motor
fails to start, check whether all settings de-
scribed above are correct. Try starting again. If
the engine still fails to start, the combustion
chamber will be saturated.
2.In this case we recommend:
Placing the stop switch on pos. “0 / stop”,
Remove the sparkplug cover,
Pull out the underlying sparkplug connector,
unscrew the sparkplug and dry it well,
Give full throttle and pull the starter
grip several times to ventilate the com
bustion chamber
replace the sparkplug, replace
sparkplug connector and sparkplug cover.
Place the stop switch on pos. “1 /
start”, starter shutter on pos. .
Repeat start process.
If the motor is cold:
With the starter shutter in position start
until the motor is audible and briefly starts
(ignites). Then immediately place the starter
shutter in position . Continue starting until
the motor turns over.
If the motor is warm:
With the starter shutter in position start
until the motor turns over.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 106 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info