User’s manual SOLIS MASTER 5000 DIGITAL
67
e) Replace the cleaned and dried brewing
unit. It will firmly click into place.
Close the service door.
Important: When replacing the brewing
unit into the machine, do not press the
«PRESS» lever since the brewing unit
might not properly click into place and be
damaged.
f) Replace the container for waste coffee,
the drip tray and the cup tray.
Note: If the brewing unit is incorrectly posi-
tioned, the
BBRREEWW UUNNIITT MMIISSSS
. appears and
the operation of the appliance will be blocked.
c) Make sure that the two steel filters are
clean. The upper filter can be removed for
cleaning by unscrewing the plastic screw
counter-clock-wise. A special key is provided.
After cleaning and drying, replace the filter
and tighten the screw with the special key.
d) Carefully clean the service compartment
with a non-abrasive detergent. Residues
of ground coffee are best removed with a vac-
uum cleaner.
Proceed as follows:
a) Remove the container for waste coffee
and the drip tray.
b) Open service door and remove the brewing
unit by holding its handle and pressing on
the part marked «PRESS». The brewing unit
can now be cleaned with warm water. Do not
put into dishwasher!
Note:
– When opening the service door, the dispensing
head must be in the lower position.
– The brewing unit can only be re-moved if the
container for waste-coffee has been removed.
9.4 Cleaning of grinder
Normally, the grinder is self-cleaning. It is sufficient to occasionally remove coffee
residues with the cleaning brush. Under no circumstances pour water into the bean
container, as this will damage the grinder!
9.5 Cleaning of brewing unit
The brewing unit should be cleaned at latest when refilling the bean container,
however, at least once a week. Prior to opening the service door (10) the
appliance must be switched off with the main ON/OFF switch (9).
