User’s manual SOLIS MASTER 5000 DIGITAL
69
^
^
10.10 Now close the steam and hot water
knob and press the «ent» button; the
RRIINNSSEE MMAACCHHIINNEE
indicator appears. Rinse
water reservoir thoroughly, fill with fresh
water and replace.
10.11 Repeat the process of holding a large
container under the steam and hot water
nozzle, slowly open the steam/hot water knob
and allow the fresh water in the reservoir to flow
through the nozzle until the indicator
RRIINNSS--
IINNGG......FFIINNIISSHHEEDD
appears. Close the
steam and hot water knob again. The descaling
program is now finished; switch from the pro-
gram back to the operating mode with the
«ent» button; the
WWAARRMMIINNGG UUPP....
indicator appears.
Important: Regular descaling will protect your
machine from costly repairs. Any damage due to
a lack of regular descaling, incorrect operation or
noncompliance with this user’s manual are not
covered by warranty. Under no circumstances
is vinegar to be used for descaling since
this will damage the machine.
The program runs in intervals until the
DDEESSCCAALLIINNGG......FFIINNIISSHHEEDD
indicator appears.
a)
QQUUAANNTTIITTYY WWAATTEERR ........NNOOTT RREEAACCHHEEDD......LLEEFFTT
QQUUAANNTTIITTYY......ll....
(if you descale before descaling message appears)
or
b)
RREESSEETT DDEESSCCAALLIINNGG ........ YYEESS
(Change between YES/NO
with the arrow buttons)
In both cases activate with the «ent» button or confirm YES/NO as
appropriate (change between Yes and No with the arrow buttons ^ and ).
The descaling indicator is now reset to 0. Press the «esc» button to leave the
program.
Important: Regular descaling will protect your
machine from costly repairs. Any damage due to
a lack of regular descaling, incorrect operation or
noncompliance with this user’s manual are not
covered by warranty. Under no circumstances
is vinegar to be used for descaling since
this will damage the machine.
DESCALING USING THE INTEGRAL DESCALING PROGRAM
Please refer to/follow points 10.1 and 10.2 before running the integral
descaling program.
Note: The descaling program takes about 40 minutes, including rinsing
10.8 Select «Descaling» with the arrow buttons ^ and and activate
with the «ent» button.
10.9 Put a large container under the steam
and hot water nozzle and slowly open the
steam/hot water knob; the
MMAACCHHIINNEE IISS
......DDEESSCCAALLIINNGG
indicator appears and the
automatic descaling program starts.
