708876

Solis 8001 Manual

30
Zoom out
Zoom in
Previous page
1/34
Next page
5958
Note:
In any case, place the crumpet in the slots with the top side facing inwards, as indi-
cated by the engraved writing between the two slots.
Toasting bagels:
The CRUMPET/FRUIT BREAD function can be also used to toast bagels.
1. Place the bagels in the slots with the cut sides facing inwards, towards the en-
graved writing between the two slots.
2. To toast the bagels, press the CRUMPET/FRUIT BREAD button once, the but-
ton surround lights up white.
3. Select the desired degree of roasting by moving the roasting degree controller (H)
to the corresponding position. We recommend setting 1.
4. Press the TOAST/CANCEL button, the button surround lights up red. The bagels
are automatically lowered and centered, the heating elements on the insides of
the left resp. right slot pair are heated up according to the setting.
5. During the toasting process, the button surround of LIFT AND LOOK™ lights
up white, indicating that the toasting process can be checked and, if neces-
sary, stopped at any time. To check the roasting degree of the bagels press the
LIFT AND LOOK™ button, the bagels pop up for a few seconds. If the bagels
are sufficiently toasted, press the TOAST/CANCEL button to stop the toasting
process. Approximately 10 seconds before the toasting process is over, the but-
ton surround of LIFT AND LOOK™ goes out and the function can no longer be
activated.
6. When the toasting process stops and while the lifting mechanism is lifting up
the bagels, the button surround of TOAST/CANCEL flashes red. The LED bar on
the other hand does not flash, instead it lights up constantly up to the selected
roasting degree.
7. Once the toasting process has been completed and the bagels have been lifted up,
the Done-signal sounds. Remove the bagels, the button surround of TOAST/CAN-
CEL lights up white for 30 seconds to indicate that the appliance is ready for the
next toasting process. The button surround of CRUMPET/FRUIT BREAD remains
lit and needs to be pressed twice if another toasting process in the CRUMPET
function is not desired. Also, the button surround of CRUMPET/FRUIT BREAD
goes out after 30 seconds resp. if the power plug has been pulled.
CRUMPET/FRUIT BREAD button (C)
With this button, you can select either the CRUMPET or the FRUIT BREAD function
to adjust the toasting time resp. the activated heating elements to the corresponding
pastry. You can select from crumpet or bagel within the CRUMPET function.
CRUMPET setting (one-sided toasting for crumpets)
In the CRUMPET setting, only the heating elements on the insides of the left resp.
right slot pairs heat up to toast the tops of the crumpet while not toasting their
bottoms.
Toasting crumpets:
1. Place the crumpets in the slots with the top sides / cut sides facing inwards, to-
wards the engraved writing between the two slots.
2. To select the CRUMPET setting, press the CRUMPET/FRUIT BREAD button
once, the button surround lights up white.
3. Select the desired degree of roasting by moving the roasting degree controller (H)
to the corresponding position.
4. Press the TOAST/CANCEL button, the button surround lights up red. The crumpet
is automatically lowered and centered, the heating elements on the insides of the
particular slot pairs heat up according to the settings.
5. During the toasting process, the button surround of LIFT AND LOOK™ lights
up white, indicating that the toasting process can be checked and, if neces-
sary, stopped at any time. To check the roasting degree of the pastry press the
LIFT AND LOOK™ button, the pastry pops up for a few seconds. If the pastry
is sufficiently toasted, press the TOAST/CANCEL button to stop the toasting
process. Approximately 10 seconds before the toasting process is over, the but-
ton surround of LIFT AND LOOK™ goes out and the function can no longer be
activated.
6. When the toasting process stops and while the lifting mechanism is lifting up
the pastry, the button surround of TOAST/CANCEL flashes red. The LED bar on
the other hand does not flash, instead it lights up constantly up to the selected
roasting degree.
7. Once the toasting process has been completed and the pastry has been lifted up,
the Done-signal sounds. Remove the pastry, the button surround of TOAST/CAN-
CEL lights up white for 30 seconds to indicate that the appliance is ready for the
next toasting process. The button surround of CRUMPET/FRUIT BREAD remains
lit and needs to be pressed twice if another toasting process in the CRUMPET
function is not desired. Also, the button surround of CRUMPET/FRUIT BREAD
goes out after 30 seconds resp. if the power plug has been pulled.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis 8001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis 8001 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Solis 8001

Solis 8001 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info