Manual Solis 8001 (page 28 of 34) (English, German, French)

708876

Zoom out

Zoom in

1/34

5554



BEFORE FIRST USE

 Remove and discard all packaging materials and potential advertisement stickers.

 Wipe the appliance chassis clean with a soft, slightly moist towel and dry it.

 Place the appliance on a dry, even and heat resistant work surface.

Note:

Before the toaster is used for the ﬁrst time, it is recommended that the roasting de-

gree controller (H) is set to the highest position and the toasting process is completed

once without toast/bread by pressing the TOAST/CANCEL button (A). The toaster

produces thin smoke and potentially a slight smell when used for the ﬁrst time. This

is absolutely normal and does not impair the functionality of your toaster in any way.

Make sure that the room is sufﬁciently ventilated.



STARTING UP

1. Plug the power plug into a suitable power outlet, the button surrounds of the

TOAST/CANCEL (A) buttons light up white. The LED bars for the toast status light

up red from left to right. Then, the bars only light up to the position which has

been set with the roasting degree controller (H). The toaster switches to standby

mode automatically after 30 seconds if no button is pressed and the roasting

degree controller (H) is not moved within this timeframe.

2. Place the bread, the slice of toast or the crumpet resp. bagel you wish to toast in

the slot. Make sure that the slices are not too thick, long or wide and precisely

ﬁt into the slots.

Your appliance is equipped with two independently functioning control

panels, allowing you to make separate settings for each pair of slots and

simultaneously perform different toasting processes.

3. Select the desired degree of roasting with the roasting degree controller (H). In

position 1, the roasting is lightest, in position 5, it is darkest. The LED bar (G) lights

up red up to the selected position.

Note:

When using the toaster for the ﬁrst time, you should start with roasting degree 3.

Different kinds of bread and personal preference might require different roasting

degree settings. For instance, the setting should be lower for light, ﬂuffy bread

than for bread with a ﬁrm texture. Likewise, older bread requires a lower degree of

roasting, as the bread is drier than fresh bread.

4. To start the toasting process, press the TOAST/CANCEL button (A) on the con-

trol panel. The button surround of the TOAST/CANCEL button lights up red and

the lift / lower mechanism automatically lowers the bread into the slots, centers

it and starts the toasting process. Once the bread has been lowered, the button

surround by LIFT AND LOOK™ (B) lights up white and the segment in the far

right of the LED bar (G) indicating the toasting status above the roasting degree

controller (H) starts ﬂashing. With the progress of the toasting process, the bar

shrinks segment by segment, moving to the left. The LIFT AND LOOK™ button

(B) illuminates until approx. 10 seconds before the end of the toasting process,

then it goes out, as the function can no longer be activated after this moment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solis 8001 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Solis 8001

Solis 8001 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solis 8001 Manual

Product: