490634
14
Zoom out
Zoom in
Previous page
1/88
Next page
14
• Clean and dry all parts. We recommend cleaning the valve with a stream of warm water.
After cleaning it, dry it and assemble all parts in the correct order.
Do not use the safety valve if the piston inside does not move correctly, even after cle-
aning. Contact your distributor to have the valve cleaned by a professional or to replace
it.
(Fig. G)
NOTE:
If you are not sure of how to follow the assembly and disassembly instructions before and
after cleaning them, do not clean the regulation and safety valves. Contact the authorised
technical assistance services for assistance.
SPECIFIC INSTRUCTIONS - WHAT TO DO WHEN:
Steam escapes between the lid and cooker.
It is possible that:
The cooker is not closed correctly. Open it and close it again properly.
The rubber joint is dirty or deteriorated. Clean or replace it.
No steam coming through the pressure adjustment valve.
It is possible that:
The cooker is not closed correctly. Repeat the closing operation.
The pressure adjustment valve is dirty. Clean it following the instructions.
• Not enough liquid in the cooker. Check the amount of liquid.
The rubber joint is not placed correctly or it is deteriorated. Clean or replace it. We recom-
mend changing the rubber joint once a year.
Too much steam coming through the pressure adjustment valve.
It is possible that:
Too much heat. Reduce it.
The pressure adjustment valve is dirty. Clean it following the instructions.
VERY IMPORTANT NOTE
The natural use of the cooker causes the different parts to become worn. Contact our
Technical Assistance Service to replace them. If you have any doubts on the efficiency of
the safety devices, do not use the pressure cooker, contact one of our authorised technical
assistance services.
When replacing parts of the cooker, always use original spare parts.
ENGLISH
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac OLYMPIC Mod OR0990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac OLYMPIC Mod OR0990 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info