490634
12
Zoom out
Zoom in
Previous page
1/88
Next page
12
Place the lid on the cooker so that the line on the closing handle matches the line on top
of the lid. Next, gently press the lid downwards and turn it until the bridge handle matches
the position of the closing handle. The cooker will be fully closed.
(Fig. B)
Move the pressure adjustment valve to the desired level.
(Fig. C)
When cooking
Place the cooker on the heat at the maximum setting. Choose the adequate heat ring size,
with a diameter that is smaller than the base of the pressure cooker. When cooking on gas,
the flame must never exceed the diameter of the base of the cooker.
When steam issues from the adjustment valve, the cooker will have reached the correct
pressure. Lower the heat intensity to maintain the minimum discharge of steam. The co-
oking time will start now.
End of the cooking period and opening the lid
Turn the heat off at the end of the cooking period and remove the cooker from the heat.
To open the lid, you must ensure that the pressure inside the cooker has fully dissipated.
This can be done as follows:
• Simply remove the cooker from the cook-top and wait until the temperature inside has
gone down. We can check the existence of pressure by pressing the push-button. If steam
is discharged from the regulation valve, there is still pressure inside the cooker.
• To accelerate the decompression period, place the cooker under a stream of cold water.
DO NOT PUT THE WHOLE COOKER UNDER WATER.
(Fig. D)
• Decompression can be achieved by pressing the push-button until all pressure inside is
discharged. This option is recommended for the preparation of food which needs short
cooking times (for example, vegetables).
(Fig. E)
Shake the cooker before opening to dissolve the pressure bubbles formed on the food.
DO NOT FORCE THE LID OPEN
MAINTENANCE
After each use, clean the cooker with hot water and non-abrasive detergent.
Never clean the lid or rubber joint in the dish washer.
ENGLISH
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac OLYMPIC Mod OR0990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac OLYMPIC Mod OR0990 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info