490634
13
Zoom out
Zoom in
Previous page
1/88
Next page
13
Do not use metal sponges or abrasive products which can damage the stainless steel
surface.
Where white stains caused by excess lime in the water appear, clean them with vinegar.
Never store the cooker with the lid closed.
We recommend dampening the closing joint with cooking oil. This may be repeated every
so often.
VALVE MAINTENANCE
Cleaning the regulation valve
• Unscrew the two bolts (13) of the lid’s edge with the correct screwdriver. Remember that
you cannot remove the grip yet.
• Unscrew the nut (14) with an adjustable spanner and remove it with the washer (15) of
the chimney of the regulation valve. Press the lid’s push-button (17) to the front position
and remove the lid’s grip. Remove the regulation valve (8) and its chimney (16) from the
handle.
• Clean the regulation valve (8) with a stream of water so that the weight inside the valve
moves freely. Put the valve to soak when it is very dirty. Do not use the regulation valve if
the weight inside is stuck. Contact your distributor to have the valve cleaned by a profes-
sional or to replace it.
• Clean the chimney of the regulation valve with a needle. We recommend using a stream
of warm water, using a soft brush or soaking it. Blow through the chimney to check whe-
ther air can pass through it or not.
After cleaning it, dry it and assemble all parts in the correct order. Hold the chimney of
the regulation valve (16) in the grip, press the push-button (17) towards the front position
and hold both parts of the lid. Gently screw the nut (14) with the washer (15) on the
chimneys thread (16) and the screws that hold the grip (13) to the inside opening of the
lid. Do not screw the screws or nut yet. Hold the regulation valve (8) with the top of the
handle. You can now screw the screws and nut.
(Fig. F)
Cleaning the regulation valve
To clean the safety valve, remove the lid handle.
• Unscrew the nut (18) and remove it from the washer (19) and the cylinder inside the
valve (20).
ENGLISH
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac OLYMPIC Mod OR0990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac OLYMPIC Mod OR0990 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info