488766

Solac IDEAL 1000 PROFESIONAL Mod FL6410 Manual

10
Zoom out
Zoom in
Previous page
1/66
Next page
10 MAIN COMPONENTS
device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
b
IMPORTANT: When you want to dispose of the appliance, NEVER
throw it in the rubbish bin. Take it to your nearest CLEAN POINT or
the waste collection centre closest to your home for processing. You
will thus be helping to take care of the environment.
2 MAIN COMPONENTS
1 Removable lid with filter
2 Main body
3 Control for regulating the temperature
4 Pilot light
5Vat
6 Handles
7 Basket
8 Basket handle
9 Draining stand
3 OPERATION
i Before you use the fryer for the first time we recommend that you wash
the basket (7) and the vat (5). To do this, remove the basket (7) from
inside the vat and take out the vat (5). You can wash the basket and the
vat either using soapy water or by putting them into the dishwasher.
Never allow the main body of the appliance to become wet (2). Once dry,
replace all the items to use them again.
1 Place the appliance on a horizontal, flat, stable surface away from the
edges and do not allow the cord to hang over the edge of the table or
work surface or to come into contact with a hot surface.
2 Pour the oil or liquid fat into the deep fryer and remember that the oil level
must be above the minimum and below the maximum. These levels are
indicated inside the vat.
3 Place the basket handle (9) in the vertical position and squeeze the
metal rods into the basket support holes (fig. A). Next place the handle
in the horizontal position until it fits into the basket support.
4 Plug the fryer into the mains.
5 Turn the temperature control regulator and select the desired
temperature, depending on the food to be fried. At this moment the pilot
light will come on. When the oil has reached the selected temperature,
the pilot light will go off.
6 Place the food in the basket (7) with the basket outside the fryer.
FL6410.book Page 10 Thursday, June 25, 2009 5:06 PM
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac IDEAL 1000 PROFESIONAL Mod FL6410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac IDEAL 1000 PROFESIONAL Mod FL6410 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info